ASXpress Operator's Manual - CETAC Technologies
ASXpress Operator's Manual - CETAC Technologies
ASXpress Operator's Manual - CETAC Technologies
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>ASXpress</strong> Rapid Sample Introduction System Operator’s <strong>Manual</strong><br />
Chapter 3: Installing the Rapid Sample Introduction System<br />
Figure 1-57<br />
Configuration Tool software window (pre-query)<br />
Note:<br />
Querying the DSA parameters is performed after the ASXPRESS system<br />
is connected to the autosampler, and the autosampler is powered on.<br />
This process reads the parameters that are stored on the rabbit<br />
processor residing within the <strong>CETAC</strong> autosampler (the default settings<br />
will be read the first time the Query is performed), and displays them in<br />
the Configuration Tool parameter fields. At such time as the query has<br />
been completed, the grayed-out fields will become active, allowing<br />
access to those fields and functions. The following steps depict the<br />
appearance of the Xpress Config Tool software window after a Query<br />
has been performed. More information regarding use of the<br />
Configuration Tool software can be found in Chapter 4 of this manual,<br />
titled “Verifying Installation/Function Overview”.<br />
67
Change language