DSLBD Office Fit Out - Broughton Construction Company

C. Samples:
1. Samples submitted shall be of production type and shall represent minimum quality of work to be
furnished by manufacturer. No work represented by samples shall be fabricated until samples are
accepted. Downgrading of quality demonstrated by samples may be cause for rejection of work.
2. Submit 2 samples of finished metal materials:
a. Extrusions: 12" lengths
b. Sheet or plate materials: 6" squares
3. Submit 2 samples of glass; sample size shall be 12" x 12".
D. Contract Closeout Submittals:
1. Submit instructions to be followed in cleaning and maintaining components of system.
1.05 QUALITY ASSURANCE
A. Qualifications:
1. When a product manufacturer is not indicated, provide products from a company specializing in
manufacture with a minimum of 5 years experience.
2. Installer shall be trained or qualified in installation techniques and procedures of all-glass entrances
and shall demonstrate a minimum of 3 years successful experience in such installation. Installer
shall employ, on Project, mechanics with a minimum of 2 years documented experience.
3. Single Source Responsibility:
a. To greatest extent possible, materials shall be products of one manufacturer or items
standard with manufacturer of entrance system.
1.07 PROJECT CONDITIONS
A. Field Measurements:
1. Verify dimensions of supporting structure by field measurements so work will be accurately
designed, fabricated and fitted to structure. Contractor and manufacturer shall cooperate to
establish and maintain field dimensions.
2. Manufacturer shall be responsible for details and dimensions not controlled by job conditions and
shall indicate, on shop drawings, required field measurements beyond his control.
1.06 WARRANTY
A. Provide a 1 year written guarantee signed by Contractor and installer agreeing to repair or replace defective
materials or workmanship, including evidence of early deterioration, weathering or aging of work, failure of
operating parts to properly function and other deterioration or failure of work to comply with performance or
other requirements.
PART 2 - PRODUCTS
2.01 SELECTIONS
A. See Appendix A - Schedule of Finishes for supplemental information and material selections.
2.02 ACCEPTABLE MANUFACTURERS
A. All-Glass Entrances:
1. Blumcraft
2. Bogardus Wilson Ltd.
3. Brite Vue Glass Systems Inc.
4. Falconer Glass Industries
ALL-GLASS ENTRANCES 08 42 26-2