DSLBD Office Fit Out - Broughton Construction Company
DSLBD Office Fit Out - Broughton Construction Company
DSLBD Office Fit Out - Broughton Construction Company
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
B. Class: As indicated by product designations.<br />
C. Wearing Surface: As indicated by product designations.<br />
D. Type, thickness and size: As indicated in Appendix A.<br />
2.5 RUBBER FLOOR TILE<br />
A. Rubber Floor Tile: ASTM F 1344.<br />
B. Class: As indicated by product designations.<br />
C. Hardness: Manufacturer's standard hardness, measured using Shore, Type A durometer per ASTM D 2240.<br />
D. Wearing Surface , type, thickness and size: As indicated in Appendix A.<br />
2.6 SHEET VINYL FLOOR COVERING<br />
A. Unbacked Sheet Vinyl Floor Covering: ASTM F 1913<br />
B. Sheet Vinyl Floor Covering With Backing: ASTM F 1303.<br />
C. Color and pattern: As indicated in Appendix A.<br />
D. Wearing Surface, Sheet Width and Seaming Method: As indicated by product designation.<br />
E. Seaming Method: As indicated in Appendix A.<br />
2.7 SHEET RUBBER FLOOR COVERING<br />
A. Hardness: ASTM D 2240. Not less than 85 Shore A.<br />
B. Slip resistance: ASTM D 2047<br />
C. Static Load Limit: ASTM F 970<br />
D. Color and pattern: As indicated in Appendix A.<br />
E. Wearing Surface, Sheet Width and Seaming Method: As indicated by product designation.<br />
F. Seaming Method: As indicated in Appendix A.<br />
2.8 STATIC-CONTROL RESILIENT FLOOR COVERINGS<br />
A. Static-Dissipative Solid Vinyl Floor Tile: ASTM F 1700, Class I (monolithic), Type A (smooth surface); in<br />
manufacturer's standard thickness, but not less than 0.08 inch (2.0 mm) thick.<br />
B. Static-Dissipative Vinyl Composition Tile (VCT): ASTM F 1066 (VCT, non-asbestos formulated), Class 2 (throughpattern<br />
tile); tiles 12 by 12 inches (305 by 305 mm), 0.125 inch (3.2 mm) thick.<br />
RESILIENT FLOORING 09 65 00 - 5