DSLBD Office Fit Out - Broughton Construction Company
DSLBD Office Fit Out - Broughton Construction Company
DSLBD Office Fit Out - Broughton Construction Company
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
.SECTION 09 21 16 - GYPSUM BOARD ASSEMBLIES<br />
PART 1 - GENERAL<br />
1.1 RELATED DOCUMENTS<br />
A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1<br />
Specification Sections, apply to this Section.<br />
1.2 SUMMARY<br />
A. This Section includes the following:<br />
1. Non-load-bearing steel framing.<br />
2. Gypsum board and related products.<br />
3. Interior Trim.<br />
4. Aluminum Trim.<br />
5. Sound Attenuation Fire Batt Insulation.<br />
6. Semi-rigid Glass Fiber Insulation<br />
7. Acoustical Sealant.<br />
1.3 DEFINITIONS<br />
A. Gypsum Board Terminology: Refer to ASTM C 11 and C36 for definitions of terms for gypsum board assemblies not<br />
defined in this Section or in other referenced standards.<br />
1.4 SUBMITTALS<br />
A. Product Data: For each type of product provided.<br />
B. Samples: For the following products:<br />
1. Trim Accessories: Full-size sample in 12-inch- (300-mm-) long length for each trim accessory provided.<br />
1.5 QUALITY ASSURANCE<br />
A. Qualifications:<br />
1. Installer shall be trained in installation techniques and procedures of gypsum board products and shall<br />
demonstrate a minimum of 3 years successful experience in such installation. Installer shall employ, on<br />
Project, mechanics with a minimum of 2 years documented experience.<br />
2. Single Source Responsibility:<br />
a. To greatest extent possible, materials, including gypsum board, adhesives, and accessories shall be<br />
products of one manufacturer or items standard with manufacturer of gypsum board.<br />
b. Provide primers and other undercoat materials which are produced or are specifically recommended<br />
by manufacturer to ensure compatibility.<br />
B. Fire-Test-Response Characteristics: For gypsum board assemblies with fire-resistance ratings, provide materials<br />
and construction identical to those tested in assembly indicated according to ASTM E 119 by an independent testing<br />
and inspecting agency acceptable to authorities having jurisdiction.<br />
1. Fire-Resistance-Rated Assemblies: Indicated by design designations from UL's "Fire Resistance Directory."<br />
GYPSUM BOARD ASSEMBLIES 09 21 16 - 1