DSLBD Office Fit Out - Broughton Construction Company

SECTION 08 70 00 - HARDWARE
PART 1 - GENERAL
1.01 SUMMARY
A. Work Included: Door hardware
1.03 SUBMITTALS
A. Product Data:
1. Submit manufacturer's literature describing products to be provided.
B. Shop Drawings:
1. Before fabrication or delivery of hardware, submit 3 copies of hardware schedule.
a. Supplier shall assume sole responsibility for provision, proper coordination and function
of finish hardware required for openings, whether or not listed in schedule below.
b. Architect's acceptance of hardware schedule shall not be construed as a complete check,
nor shall it relieve supplier from responsibility for errors, deviations, or omissions from
code requirements, and need to satisfactorily complete Project.
2. Submit 3 copies of keying schedule.
1.03 QUALITY ASSURANCE
A. Qualifications:
1. Hardware supplier shall be a company specializing in distribution of contract hardware for a period
of at least 5 years.
2. Supplier shall have, on staff, a full time employee who is a member in good standing of Door and
Hardware Institute and a Certified Architectural Hardware Consultant.
B. Regulatory Requirements:
1. Uniform Federal Accessibility Standards
2. ADA - Americans with Disabilities Act
3. National Fire Protection Association:
a. NFPA 80
b. NFPA 101
c. NFPA 105
C. Coordination:
1. Before ordering materials, carefully examine scale, full size, and shop drawings of work requiring
hardware, and verify that material selected will properly fit Work.
2. Coordinate installation of electric hinges, locks, and security devices with installation of electrical
connections.
1.04 WARRANTY
A. Furnish a 2 year factory warranty on door closers against defects in material and workmanship from Date of
Substantial Completion.
PART 2 - PRODUCTS
2.01 ACCEPTABLE MANUFACTURERS
A. Hinges:
1. Hager
HARDWARE 08 70 00-1