DSLBD Office Fit Out - Broughton Construction Company
DSLBD Office Fit Out - Broughton Construction Company
DSLBD Office Fit Out - Broughton Construction Company
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
c. United States Gypsum Co.<br />
3. Interior Trim:<br />
a. Dale Industries, Inc. – Dale-Incor.<br />
b. Flannery, Inc.<br />
c. G-P Gypsum Corp.<br />
d. National Gypsum <strong>Company</strong>.<br />
e. United States Gypsum Co.<br />
4. Aluminum Trim:<br />
a. Fry Reglet Corp.<br />
b. MM Systems Corporation.<br />
c. Pittcon Industries.<br />
d. Manufacturer listed in Appendix A- Schedule of Materials.<br />
5. Sound Attenuation Fire Batt Insulation:<br />
a. Fibrex.<br />
b. Owens Corning.<br />
c. United States Gypsum Co.<br />
6. Semi-rigid Glass Fiber Insulation:<br />
a. Certain-Teed<br />
b. Johns Mansville<br />
c. Owens Corning.<br />
7. Acoustical Sealant:<br />
a. Bostik.<br />
b. Pecora.<br />
c. Tremco<br />
d. United States Gypsum Co.<br />
2.3 STEEL SUSPENDED CEILING AND SOFFIT FRAMING<br />
A. Components, General: Comply with ASTM C 754 for conditions indicated.<br />
B. Tie Wire: ASTM A 641/A 641M, Class 1 zinc coating, soft temper, 0.0625-inch- (1.59-mm-) diameter wire, or double<br />
strand of 0.0475-inch- (1.21-mm-) diameter wire.<br />
C. Hanger Attachments to Concrete: As follows:<br />
1. Anchors: Fabricated from corrosion-resistant materials with holes or loops for attaching hanger wires and<br />
capable of sustaining, without failure, a load equal to 5 times that imposed by construction as determined by<br />
testing according to ASTM E 488 by a qualified independent testing agency.<br />
a. Type: Post installed, chemical or expansion anchor.<br />
2. Powder-Actuated Fasteners: Suitable for application indicated, fabricated from corrosion-resistant materials,<br />
with clips or other devices for attaching hangers of type indicated, and capable of sustaining, without failure,<br />
a load equal to 10 times that imposed by construction as determined by testing according to ASTM E 1190<br />
by a qualified independent testing agency.<br />
D. Hangers: As follows:<br />
1. Wire Hangers: ASTM A 641/A 641M, Class 1 zinc coating, soft temper, 0.162-inch (4.12-mm) diameter.<br />
2. Rod Hangers: ASTM A 510 (ASTM A 510M), mild carbon steel.<br />
a. Diameter: 1/4-inch (6.34-mm).<br />
b. Protective Coating: ASTM A 153/A 153M, hot-dip galvanized.<br />
E. Furring Channels (Furring Members): Commercial-steel sheet with manufacturer's standard corrosion-resistant zinc<br />
coating.<br />
1. Cold Rolled Channels: 0.0538-inch (1.37-mm) bare steel thickness, with minimum 1/2-inch- (12.7-mm-) wide<br />
flange, 3/4 inch (19.1 mm) deep.<br />
2. Steel Studs: ASTM C 645.<br />
a. Minimum Base Metal Thickness: 0.0179 inch (0.45 mm) (25 gauge).<br />
GYPSUM BOARD ASSEMBLIES 09 21 16 - 3