DSLBD Office Fit Out - Broughton Construction Company

A. Furnish extra materials described below that match products installed and that are packaged with protective covering
for storage and identified with labels describing contents.
1. Tile and Trim Units: Furnish quantity of full-size units equal to 2 percent of amount installed, for each type,
composition, color, pattern, and size indicated.
PART 2 - PRODUCTS
2.1 SELECTIONS
A. See Appendix A – Schedule of Materials for supplemental information and product selections.
2.2 MANUFACTURERS
A. The following requirements apply for product selection:
1. Products: Subject to compliance with requirements, provide one of the products specified.
2. Manufacturers: Subject to compliance with requirements, provide specified products by one of the
manufacturers specified.
B. Manufacturers:
1. Tile Products :
a. American Olean; Div. of Dal-Tile International Corp.
b. Daltile; Div. of Dal-Tile International Inc.
c. Summitville Tiles, Inc.
d. United States Ceramic Tile Company.
e. Manufacturer Listed in Appendix A – Schedule of Materials.
2. Waterproofing:
a. Boiardi Products Corporation.
b. Bostik
c. Compotite Corporation.
d. Custom Building Products
e. LATICRETE International Inc.
f. MAPEI Corporation.
g. National Applied Construction Products, Inc.
h. Schluter Systems L.P.
i. Southern Grouts & Mortars, Inc.
j. Summitville Tiles, Inc.
k. TEC Specialty Products Inc
l. The Noble Company.
3. Setting and Grouting Materials:
a. American Olean; Div. of Dal-Tile International Corp.
b. Boiardi Products Corporation.
c. Bonsal, W.R. Company.
d. Custom Building Products
e. LATICRETE International Inc.
f. MAPEI Corporation.
g. Summitville Tiles, Inc.
h. Manufacturer Listed in Appendix A – Schedule of Materials.
TILE 09 30 00 - 3