DSLBD Office Fit Out - Broughton Construction Company
DSLBD Office Fit Out - Broughton Construction Company
DSLBD Office Fit Out - Broughton Construction Company
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
1.5 DELIVERY, STORAGE, AND HANDLING<br />
A. Store resilient products and installation materials in dry spaces protected from the weather, with ambient<br />
temperatures maintained within range recommended by manufacturer, but not less than 50 deg F (10 deg C) or more<br />
than 90 deg F (32 deg C).<br />
1. Floor Tile: Store on flat surfaces.<br />
2. Sheet Floor Covering: Store rolls upright.<br />
1.6 PROJECT CONDITIONS<br />
A. Maintain temperatures within range recommended by manufacturer, but not less than 70 deg F (21 deg C) or more<br />
than 85 deg F (29 deg C), in spaces to receive floor covering during the following time periods:<br />
1. 48 hours before installation.<br />
2. During installation.<br />
3. 48 hours after installation.<br />
B. After post-installation period, maintain temperatures within range recommended by manufacturer, but not less than<br />
55 deg F (13 deg C) Insert temperature or more than 95 deg F (35 deg C).<br />
C. Close spaces to traffic during floor covering installation and 48 hours after floor covering installation.<br />
D. Install resilient products after other finishing operations, including painting, have been completed..<br />
1.7 EXTRA MATERIALS<br />
A. Furnish extra materials described below that match products installed and that are packaged with protective covering<br />
for storage and identified with labels describing contents.<br />
1. Floor Tile: Furnish not less than 1 box for each 50 boxes or fraction thereof, of each color, pattern, and size<br />
of floor tile installed.<br />
2. Sheet Floor Covering: Furnish not less than 10 linear feet (3 linear m) for each 500 linear feet (152 linear m)<br />
or fraction thereof, in roll form for each color, pattern, and type of sheet floor covering installed.<br />
3. Furnish not less than 5 linear feet (3 linear m) for every 500 linear feet (150 linear m) or fraction thereof, of<br />
each type, color, pattern, and size of resilient product installed.<br />
PART 2 - PRODUCTS<br />
2.1 SELECTIONS<br />
A. See Appendix A - Schedule of Materials for supplemental information and material selections.<br />
2.2 MANUFACTURERS<br />
A. The following requirements apply for product selection:<br />
1. Products: Subject to compliance with requirements, provide one of the products specified.<br />
2. Manufacturers: Subject to compliance with requirements, provide products by the manufacturers specified.<br />
RESILIENT FLOORING 09 65 00 - 2
Change language