DSLBD Office Fit Out - Broughton Construction Company
DSLBD Office Fit Out - Broughton Construction Company
DSLBD Office Fit Out - Broughton Construction Company
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
C. Sound Transmission Characteristics: For gypsum board assemblies with STC ratings, provide materials and<br />
construction identical to those tested in assembly indicated according to ASTM E 90 and classified according to<br />
ASTM E 413 by a qualified independent testing agency.<br />
1. STC-Rated Assemblies: Indicated by design designations from GA-600, "Fire Resistance Design Manual."<br />
D. Installation Characteristics. Gypsum board assemblies shall be installed in accordance with Gypsum Association<br />
Manuals, GA-201, “ Using Gypsum Board for Walls and Ceilings”, GA-216, “Application and Finishing of Gypsum<br />
Board”, GA-223, “Gypsum Board Panel Product Types, Uses, Sizes, and Standards”, GA-226, “Application of<br />
Gypsum Board to form Curved Surfaces”, GA-600, "Fire Resistance Design Manual.".<br />
1.6 DELIVERY, STORAGE, AND HANDLING<br />
A. Deliver materials in original packages, containers, or bundles bearing brand name and identification of manufacturer<br />
or supplier.<br />
B. Store materials inside under cover and keep them dry and protected against damage from weather, direct sunlight,<br />
surface contamination, corrosion, construction traffic, and other causes. Stack gypsum panels flat to prevent<br />
sagging.<br />
1.7 PROJECT CONDITIONS<br />
A. Environmental Limitations: Comply with ASTM C 840 requirements or gypsum board manufacturer's written<br />
recommendations, whichever are more stringent.<br />
PART 2 - PRODUCTS<br />
2.1 SELECTIONS<br />
A. Size: Provide in maximum lengths and widths available that will minimize joints in each area and that correspond<br />
with support system indicated. Material to be provided pre-cut to full wall height where possible to minimize waste<br />
and field cutting of panels.<br />
2.2 MANUFACTURERS<br />
A. The following requirements apply for product selection:<br />
1. Products: Subject to compliance with requirements, provide one of the products specified.<br />
2. Manufacturers: Subject to compliance with requirements, provide products by the manufacturers specified.<br />
B. Manufacturers:<br />
1. Steel Framing and Furring:<br />
a. Clark Steel Framing Systems<br />
b. Dale Industries, Inc. - Dale/Incor.<br />
c. Dietrich Industries, Inc.<br />
d. Marino/Ware<br />
e. National Gypsum <strong>Company</strong>.<br />
f. United States Gypsum Co.<br />
2. Gypsum Board and Related Products:<br />
a. G-P Gypsum Corp.<br />
b. National Gypsum <strong>Company</strong>.<br />
GYPSUM BOARD ASSEMBLIES 09 21 16 - 2
Change language