PI-VR - VRED Professional Documentation - PI-VR GmbH

VRED DocumentationYou are here: Modules > Variants Tab > VariantSetsVariantSetsGetting startedUsing VRED ProfessionalMenus and icons tabScenegraphModulesTerminalMaterial EditorAnimation TabAppearance TabInfo TabRendering TabVariants TabVariantSetsVariantsSearchSend QuestionVariantSetsVRED offers the possibility to set updifferent scenarios by using theVariantSets. All available Variants can becombined together in one Scene. Forconfigurators logical connections can begenerated.General:Hotkey: For each Variant Set ahotkey can be assigned.Comment: Adds a customcomment to each Variant Set.Geometry: From the Variants Tab,multiple Geometry Variants can becombined together in one geometryvariant set, by dragging the desiredgeometry variants from the Variants Tabto the Geometry Tab of the VariantSets.Make sure, that at least one VariantSet iscreated. Each Geometry Variant can havedifferent states. They will be activated bydouble clicking on the Variantset.Material: From the Variants Tab, multipleMaterial Variants can be combinedtogether in one Material Variant Set, bydragging the desired Material Variantsfrom the Variants Tab to the Material Tabof the VariantSets. Make sure, that atleast one VariantSet is created. EachMaterial Variant can have different states.They will be activated by double clickingon the Variantset.Lights: From the Variants Tab, multipleLight Variants can be combined togetherin one Light Variant Set, by dragging thedesired Light Variants from the VariantsTab into the Lights Tab of the VariantSets. Make sure that at least one VariantSet is created. Each Light Variant Set canhave different states. They will beactivated by double clicking on the VariantSet.View: Multiple Viewpoints can be addedin this tab