PI-VR - VRED Professional Documentation - PI-VR GmbH

Create - Creates VRED Primitives. Select the object to be created.Line - Creates a line.Point 1 - sets start point x-, y-, z-position.Point 2 - sets end point x-, y-, z-position.Plane - Creates a polygon plane.Size x/y - defines plane`s x and y diameter in mm.Resolution - defines amount of subdivisions on x- and y-axis.Box - Creates a polygon box.Size x/y/z - defines box size on x, y and z in mm.Resolution y/y/z - defines amount of subdivisions on x-, y- and z-axis.Cylinder - Creates a polygon cylinder.Height/Radius - defines the cylinder height and radius size in mm.Sides - defines the amount of cylinder edges.Show side - activates sides creation.Show top - activates top creation.Show bottom - activates bottom creation.Cone - Creates a polygon cone.Height/Redius - defines the cones height and radius in mm.Sides - defines the amount of cone edges.Show side - activates side creation.Show bottom -activates bottom creation.Sphere - Creates a polygon sphere.Radius - defines sphere radius.Latres - defines the height divisions.Longres - defines the length divisions.Torus - Creates a polygon torus.inner Radius - defines the torus inner radius.outer Radius - defines the torus outer radius.Sides - defines the amount of side subdivisions.Rings - defines the amount of ring subdivisions.Decore - starts a decore process. All geometries which all fully enclosed by other objectswill be deleted. Read Appearance ->GeometryEditor->Decore for decore settings.Connector - Using the connector VRED instances on independent computers can besynchronized for navigation.Connect to - here the connection settings can be entered, when this VRED instance is a