PI-VR - VRED Professional Documentation - PI-VR GmbH

VRED DocumentationYou are here: Modules > Animation Tab > CameraCameraGetting startedUsing VRED ProfessionalMenus and icons tabScenegraphModulesTerminalMaterial EditorAnimation TabAnimationCameraSequencerCurve EditorClip MakerAppearance TabInfo TabRendering TabVariants TabSearchSend QuestionCamera - in the Camera Module all 3D cameraparameters can be set.View Parameters - in the View Parameterstab all 3D camera view settings can be set.Field of View - sets the camera´svertical field of view angle measured indegrees. The Field of View parameter isdirectly connected to the focal lengthand sensor height parameter.Near Plane - sets the near clip planemeasured in millimeters. All objectscloser to the camera than the near clipplane will not be rendered.Far Plane - sets the far clip planemeasured in millimeters. All objectsfurther away from the camera than thefar clip plane will not be rendered.Focal length - sets the virtual objective´s focal length in millimeter valuedepending on the set sensor height and the defined field of view.Sensor height - sets the sensor height in millimeters.Motion Blur - in the motion blur tab all motion blur settings scan be defined.Enable Motion Blur - activates motion blur rendering.Samples - sets the amount of minimum samples for the motionblur rendering.Duration - sets the blur duration time in seconds. The Durationparameter is directly inverse connected to the Shutter Timeparameter.Shutter Time - sets the camera´s shutter time.Stereo Settings - Opens the Editor for Stereo settings.Eye Seperation - Sets the viewer´s eye left and right eyedistance in millimeters.Zero parallax distance - Sets the viewer´s focus distance.