The Kyma Language for Sound Design, Version 4.5

FeedbackLoopInput
Xtra Category
A FeedbackLoopInput and FeedbackLoopOutput must always be used as a pair sharing the same
Connection name, start time, and duration. The FeedbackLoopInput writes into the delay line specified in
Connection, and the FeedbackLoopOutput reads out of that same delay line.
(This differs from other ways of doing feedback in that it allows Kyma’s scheduler to put the input to the
delay line and the output from the delay line on different expansion cards--freeing up more computation
time for processing modules that are in the loop. For simpler cases of feedback, use the
DelayWithFeedback or simply write into memory with a MemoryWriter and read out of it with a TimeOffset
Sample, Oscillator, or TriggeredTableRead.)
Input
This is the signal that is to be delayed.
Connection
This is the name of the delay line (It must be the same as that specified in the corresponding
FeedbackLoopOutput).
254