The Kyma Language for Sound Design, Version 4.5

Feedback
The higher the Feedback, the longer the filter will ring in response to an input.
This is the amount of filtered signal that is fed back in and added to the Input (when low pass is selected,
the feedback is negative). Negative feedback values are the same as the positive ones but 180 degrees
out of phase.
To simulate a traditional analog sound, use a 4th order low pass or high pass filter, and use feedback to
increase the "resonance".
Order
The order of the filter corresponds to the number of poles. In general, the higher the order of the filter,
the sharper the cutoff, and the more real-time computation required.
258