The Kyma Language for Sound Design, Version 4.5

Mixer
Mixing & Panning Category
Adds all of its Inputs together. Mixes the outputs of all the Sounds in the Inputs field.
Inputs
Inputs are all added together (mixed) so they will be heard simultaneously.
Left
This controls the level of the left input channel. The maximum value is 1 and the minimum is -1. The left
channel of the input is multiplied by the value of this parameter. Some example values for Left are:
1 (no attenuation)
0 (maximum attenuation)
!Fader1 (continuous controller sets level)
!KeyVelocity (MIDI key velocity controls the amplitude)
You can also paste another signal into this field, and the amplitude will vary with the output amplitude of
the pasted signal (something like an LFO controlling the attenuation). (See the manual for a complete
description of hot parameters, EventValues, EventSources, and Map files).
Right
This controls the level of the right input channel. The maximum value is 1 and the minimum is -1. The
right channel of the input is multiplied by the value of Right. Some example values for Right are:
1 (no attenuation)
0 (maximum attenuation)
!Fader1 (continuous controller sets level)
!KeyVelocity (MIDI key velocity controls the amplitude)
You can also paste another signal into this field, and the amplitude will vary with the output amplitude of
the pasted signal (something like an LFO controlling the attenuation). (See the manual for a complete
description of hot parameters, EventValues, EventSources, and Map files).
298