The Kyma Language for Sound Design, Version 4.5

StereoMix2
Mixing & Panning Category
Adds the outputs of the Sounds in the In1 and In2 fields, each with the specified Pan and Scale
(attenuation) value. The overall output can also be panned and attenuated.
Left
This controls the level of the left outpu channel. The maximum value is 1 and the minimum is -1. The left
channel of the mix is multiplied by the value of this parameter. Some example values for Left are:
1 (no attenuation)
0 (maximum attenuation)
!Fader1 (continuous controller sets level)
!KeyVelocity (MIDI key velocity controls the amplitude)
You can also paste another signal into this field, and the amplitude will vary with the output amplitude of
the pasted signal (something like an LFO controlling the attenuation). (See the manual for a complete
description of hot parameters, EventValues, EventSources, and Map files).
Right
This controls the level of the right output channel. The maximum value is 1 and the minimum is -1. The
right channel of the mix is multiplied by the value of Right. Some example values for Right are:
1 (no attenuation)
0 (maximum attenuation)
!Fader1 (continuous controller sets level)
!KeyVelocity (MIDI key velocity controls the amplitude)
You can also paste another signal into this field, and the amplitude will vary with the output amplitude of
the pasted signal (something like an LFO controlling the attenuation). (See the manual for a complete
description of hot parameters, EventValues, EventSources, and Map files).
In1
The output of this Sound will be added to the output of the Sound in In2.
Pan1
The stereo position of In1. (0 is hard left and 1 is hard right).
Scale1
Attenuation on In1. 1 (or 0 dB) is no attenuation, and 0 is fully attenuated.
In2
This Sound is added to the Sound in the In1 field.
Pan2
The stereo position of In2. (0 is hard left and 1 is hard right).
Scale2
Attenuation on In2. 1 (or 0 dB) is no attenuation, and 0 is fully attenuated.
365