1 Surgery CAMLOG Compendium

Surgery Manual
SCREW-CYLINDER-LINE Insertion
Implant Bed Preparation for SCREW-CYLINDER-LINE Implants
Preparation of the implant bed includes
punch-marking the cortical bone, pilot
drilling, pre-drilling, and form drilling.
The pilot drilling and pre-drilling define
the depth and axis of the implant bed
and ensure tissue-conservative bone
preparation by enlarging the diameter in
small gradations.
Pilot Drill and Pre-Drill Depth Stop
The pilot drill and pre-drill have a maximum
working length of 16 mm. The
drilling depths of 9, 11, and 13 mm are
laser-marked. An insertable depth stop
limits the drilling depth to the selected
depth of 9, 11, or 13 mm.
Caution!
The depth stops for pilot drills, and
pre-drills five bladed cutter, shown
here should be used only for
implant bed preparation of ROOT-
LINE, SCREW-CYLINDER-LINE, and
CYLINDER-LINE Implants. These
instruments are closely matched to
one another.
96
Drill Extension
A drill extension is available to prevent
resting of the angled handpiece on the
dental crown during preparation of the
implant bed adjacent to elongated teeth.
A longer irrigation tube is required for
the internal irrigation system.
Drill extension
Depth stop for pilot drills and
pre-drills