1 Surgery CAMLOG Compendium

5. SCREW-LINE Implant
Introduction
The SCREW-LINE Implant is a universally
indicated screw implant with the option
of either Promote ® or Promote ® plus surface.
It is suitable for both late implantation
and immediate/delayed immediate
implantation. The selected healing method
may be either submerged or transgingival.
The implant is easily insertable because
the taper of the implant body (3°-9°
depending on length and diameter)
induces self-centering. The self-tapping
thread provides a continuous grip on the
bone and high primary stability. The
macro-configuration of the implant in
conjunction with the Promote ® plus surface
leads to larger contact with the
bone, compared with the Promote ® sur-
Area of Use/Indication for the
SCREW-LINE implants with
Promote ® plus Surface
A smaller coronal implant shoulder is
especially beneficial in treating esthetically
challenging areas. The machined
segment of a SCREW-LINE Implant with
Promote ® plus surface measures only 0.4
mm. The implant is inserted into the
bone as far as this segment.
The following clinical prerequisites
should be present:
• Normal to thick biotype
• Gingival height of at least 3.0 mm
• Minimum width of 1.0 mm of the
attached gingiva
• Minimum distance of 2.0 mm between
the attached gingiva and the mimetic
musculature
• Removal of the periosteum at the time
of exposure to be performed at the
implant insertion area only.
Surgery Manual
SCREW-LINE Insertion
Apart from these requirements, the
range of indications and the implant bed
preparation for SCREW-LINE Implants
Promote ® and Promote ® plus are identical.
face. SCREW-LINE Implant
SCREW-LINE Implant
Promote ® plus
Promote ®
39