1 Surgery CAMLOG Compendium

Incision line
The example indication shows the insertion
of a CYLINDER-LINE Implant with
4.3 mm diameter and 13 mm length in
the lateral mandible. The implantation
technique is single-stage transperiosteal.
A split-flap preparation is selected for
the incision line.
Following a somewhat lingual, paracrestal
mucosal incision, a predominantly
epiperiosteal flap is created on the
vestibular aspect. The muscle is divided
and the preparation is continued for
approx. 5 mm further. The mucosa is
prepared 2-3 mm lingually to facilitate
later suturing.
Following marking of the desired implant
position (if necessary with the aid of a
drilling template), the periosteum is
removed circularly in the area of this site
alone (with a gingival punch or scalpel).
This is followed by preparation of the
implant bed to match the selected
implant diameter and length with the
customized instruments for the
CYLINDER-LINE Implant.
Initial situation
Mucosal incision
Epiperiosteal
split-flap preparation
Removal of the periosteum
at the implant site
Surgery Manual
CYLINDER-LINE Insertion
119