1 Surgery CAMLOG Compendium

Surgery Manual
SCREW-LINE Insertion
Implant Bed Preparation
Overview of the implant bed preparation.
Note: implant bed preparation is identical
for SCREW-LINE Implants with
Promote ® and Promote ® plus surfaces.
• Punch-mark the desired implant position
with the internally irrigated Ø
2.3 mm round bur.
• Deep drill along the implant axial line
with the internally irrigated Ø 2.0 mm
pilot drill.
• Check with Ø 1.7-2.8 / 2.0 mm paralleling
pin with depth marks.
• Pre-drill with the internally irrigated Ø
1.7-2.8 mm pre-drill.
• Check with the Ø 1.7-2.8 / 2.0 mm
paralleling pin with depth marks.
• Shape with internally irrigated form
drill.
• Probe the implant bed hole for its
bony end.
• Cortical bone drilling (for bone quality
D1).
• Thread cutting with SCREW-LINE tap
(for bone quality D1 and D2)
42
Optional for all
diameters
1.0 mm
0.4 mm
Promote ® plus
Promote ®
0.4 mm
The indication range and implant bed
preparation of the SCREW-LINE Implant
are identical for Promote ® and Promote ®
plus surfaces.
Drilling Sequence
Ø 3.3 mm
Ø 3.8 mm
Ø 4.3 mm
Ø 5.0 mm
Ø 6.0 mm
Round bur
Ø 2.3 mm
Round bur
Ø 2.3 mm
Round bur
Ø 2.3 mm
Round bur
Ø 2.3 mm
Round bur
Ø 2.3 mm
Pilot drill
Ø 2.0 mm
16 mm
13 mm
11 mm
9 mm
16 mm
13 mm
11 mm
9 mm
16 mm
13 mm
11 mm
9 mm
16 mm
13 mm
11 mm
9 mm
16 mm
13 mm
11 mm
9 mm
Depth Stop
Depth Stop
Depth Stop
Depth Stop
Depth Stop
* If the bone quality is D1 or D2, use of the tap (thread cutter) is recommended for SCREW-LINE
Implants.
Paralleling pin
Paralleling pin
Paralleling pin
Paralleling pin
Paralleling pin
Pre-drill
Ø 1.7 –
2.8 mm
rpm 800 800 600
Pilot drill
Ø 2.0 mm
Pilot drill
Ø 2.0 mm
Pilot drill
Ø 2.0 mm
Pilot drill
Ø 2.0 mm
16 mm
13 mm
11 mm
9 mm
Pre-drill
Ø 1.7 –
2.8 mm
rpm 800 800 600
16 mm
13 mm
11 mm
9 mm
Pre-drill
Ø 1.7 –
2.8 mm
rpm 800 800 600
16 mm
13 mm
11 mm
9 mm
Pre-drill
Ø 1.7 –
2.8 mm
rpm 800 800 600
16 mm
13 mm
11 mm
9 mm
Pre-drill
Ø 1.7 –
2.8 mm
rpm 800 800 600
16 mm
13 mm
11 mm
9 mm