1 Surgery CAMLOG Compendium

Transfer System
Introduction
10. Transfer System
Introduction
The transfer system provides a highly
precise, rotation-resistant impression
system for both closed and open impression
tray methods. The system components
are color-coded by implant diameter.
You should make sure to mix and match
only implants and prosthetic components
of the same diameter (by color-coding).
No components of different diameters
should be attached to one another. The
system components must not be modified.
Color-Coding
140
Ø 3.3 mm gray
Ø 3.8 mm yellow
Ø 4.3 mm red
Ø 5.0 mm blue
Ø 6.0 mm green
Impression Methods
The impression method may optionally
be either for closed or open tray.
If heavily divergent implant axes are
present or combination with a functional
impression is desired, the open impression
method should be used. Special
impression posts must be used along
with ball abutments, Locator ® abutments,
or bar abutments.
Impression posts, closed tray
Impression posts, open tray
Impression Material
Silicone or polyether materials can be
used as impression materials in both
closed and open methods.