1 Surgery CAMLOG Compendium
1 Surgery CAMLOG Compendium
1 Surgery CAMLOG Compendium
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Pre-Drilling<br />
An internally irrigated pre-drill five bladed<br />
cutter is available for CYLINDER-LINE<br />
Implants; the available diameters are 2.8<br />
mm / 3.3 mm / 3.6 mm.<br />
The recommended drilling speed is 600<br />
rpm.<br />
The depth marks on the drill match the<br />
implant lengths. For safety reasons, a<br />
depth stop matching the proposed<br />
implant length should be used.<br />
Pre-Drill, five bladed Cutter<br />
Sequence für CYLINDER-LINE Implants<br />
for Implant<br />
Ø 3.3 mm<br />
Pre-drill<br />
Ø 2.8 mm<br />
Form drill<br />
Ø 3.3 mm<br />
max. 600 rpm<br />
Ø 2.8 mm Ø 3.3 mm<br />
Pre-drill, five bladed cutter<br />
for Implant<br />
Ø 3.8 mm<br />
Pre-drill<br />
Ø 3.3 mm<br />
Form drill<br />
Ø 3.8 mm<br />
Ø 3.6 mm<br />
The implant bed preparation is performed<br />
with pre-drills five bladed cutter<br />
in increasing size with reference to the<br />
selected implant diameter and insertion<br />
depth. Then the implant bed is finished<br />
to the final size with a form drill of<br />
appropriate length.<br />
Ø 2.8 mm pre-drill<br />
for Implant<br />
Ø 4.3 mm<br />
Pre-drill<br />
Ø 3.6 mm<br />
Form drill<br />
Ø 4.3 mm<br />
Caution!<br />
The Ø 3.3 mm pre-drill must not be used for implant diameter 3.3 mm.<br />
The Ø 3.6 mm pre-drill must not be used for implant diameter 3.8 mm.<br />
for Implant<br />
Ø 5.0 mm<br />
Form drill<br />
Ø 5.0 mm<br />
Drilling depth check after<br />
pre-drilling Ø 2.8 mm<br />
<strong>Surgery</strong> Manual<br />
CYLINDER-LINE Insertion<br />
Paralleling pin, short,<br />
Ø 2.8 / 3.6 mm<br />
Paralleling pin, long,<br />
with depth marks, Ø 2.8 / 3.6 mm<br />
for Implant<br />
Ø 6.0 mm<br />
Form drill<br />
Ø 6.0 mm<br />
Parallelism/axis check after<br />
pre-drilling Ø 2.8 mm<br />
125
Change language