1 Surgery CAMLOG Compendium

7. SCREW-CYLINDER-
LINE Implant
Introduction
The SCREW-CYLINDER-LINE Implant
(with Promote ® surface) is particularly
suitable for restorations in structurally
weak sites in the posterior maxilla. In
conjunction with sinus floor elevation
and augmentation, its special configuration
permits the use of the residual
crestal bone height (>5 mm) for primary
stabilization of the implant through its
threaded segment.
The cylindrical apical segment preserves
the sinus mucosa during insertion of the
implant (no thread edges) and provides
superior adaptation to the particular
bone augmentation material used.
The CAMLOG connection enables the
use of every type of prosthetic restoration.
Available diameters are 3.8 mm, 4.3
mm, 5.0 mm, and 6.0 mm, in lengths of
9 mm, 11 mm, 13 mm, and 16 mm.
Surgery Manual
SCREW-CYLINDER-LINE Insertion
SCREW-CYLINDER-LINE
Implant with Promote ®
91