1 Surgery CAMLOG Compendium

11. Bite Registration
System Components
The impression posts for the closed
impression method are used for the bite
registration (see "Closed impression
method", page 141). The diametermatched,
color-coded bite registration
caps are installed on the impression
posts. Correct seating is indicated by a
perceptible locking feel. Sharp edges in
the register are prevented by the caps.
Registration requires only standard
materials. The caps should not be
allowed to bond to the register and are
delivered to the laboratory along with
the impression posts.
Alternatively, under limited space conditions
and to prevent bite elevation, a
6.0 mm healing cap cylindrical may be
used.
Caution! Record the diameter, position,
and height of the healing cap
on the information work sheet and
deliver it with the corresponding
healing cap to the dental laboratory.
All transfer system and bite registration
components are single-use
items!
For precision reasons, they may not
be reused.
Screwdrivers,
extra-short, short, long
Impression posts, closed tray
Impression post
Lab analog
Transfer System
Bite Registration
Fixing screw for
impression post
Bite registration
cap
147