SCHRIFTENREIHE SCHIFFBAU Festschrift anlässlich des 100 ...

[5] HARDER: Harmonization of Rules and Design Rationale. U Contract No. GDRB – CT-
1998-00028, Final Technical Report, 2003
[6] IMO: AGREEMENT CONCERNING SPECIFIC STABILITY REQUIREMENTS FOR RO-
RO PASSENGER SHIPS UNDERTAKING REGULAR SCHEDULED INTERNATIONAL
VOYAGES BETWEEN OR TO OR FROM DESIGNATES PORTS IN NORTH WEST
EUROPE AND THE BALTIC SEA. MSC/CIRC. 1891. London. International Maritime
Organization 1996.
[7] IMO: SOLAS. International Convetion for the Safety of Life at Sea, 1974, and its Protocol
of 1988: articles, annexes, and certificates. Consolidated Edition 2004, London. International
Maritime Organization, 2004.
[8] IMO: Load Lines: International Convention on Load Lines, 1966 and Protocol of 1988, as
amended 2003. Consolidated Edition 2005, London. International Maritime Organization,
2005.
[9] IMO: Interim Guidelines for Evacuation Analyses for New and Existing Passenger Ships.
IMO MSC/Circ. 1033, London. International Maritime Organization, 2002.
[10] IMO: Guidelines for the Formal Safety Assessment (FSA) for use in the IMO rule-
making process. IMO MSC/Circ. 1023-MEPC/circ. 392, London. International Maritime
Organization, 2005.
[11] IMO: MEPC 54/21 ANNEX 2, RESOLUTION MEPC.141(51) ANNEX, AMENDMENTS
TO THE REVISED MARPOL ANNEX1, Regulation 12A- Oil fuel tank protection, London.
International Maritime Organization, 2006.
[12] IMO: Guideline on Alternative Design and Arrangements for SOLAS chapter II-1 and III,
MSC/Circ.1212, London. International Maritime Organization, 2006.
[13] IMO: Development of revised SOLAS Chapter II-1 Parts A, B, and B-1. SLF 42/3/3,
1993, London. International Maritime Organization, 1993.
[14] IMO: Passenger Ship Safety. Work Plan of assessment of time to-flood-prediction,
submitted by International Towing Tank Conference (ITTC), 2006. SLF 49/4/2, London.
International Maritime Organization, 2006.
[15] KNÜPFFR, K.: Leckrechnung bei einfacher und mehrfacher Beschädigung. In: JSTG
1961, Bd. 55.
[16] KOELMAN, H.J.: Re-Evaluation of the Method to determine the Probability of Damage.
In: Proc. IMDC 2006, Ann Arbour, USA
[17] KONOVESSIS, D.; VASSALOS, D.: Design for Damage Survivability – Development
and Application of an Optimal Design Procedure. In: Proc. HIPER 01, Hamburg, Germany,
2001.
[18] KRAPPINGER, O.: Einfluß von Tiefgang, Flutbarkeit, Stabilität und Seegang auf die
Beurteilung von Unterteilungen. In: JSTG 1961, Bd. 55
[19] KRÜGER, S.; KEHREN, F.-I.: Development of a Probabilistic Methodology for Damage
Stability regarding Bottom Damages. In: Proc. PRADS 2007, Houston
83