Catalog PM 21 2013 - Siemens Industry, Inc.

SINAMICS S120 drive system
Line Modules and line-side components
Smart Line Modules in chassis format
© Siemens AG 2013
3
■ Technical specifications
Smart Line Module in chassis format
6SL3330-6T...
Line connection voltage
(up to 2000 m (6562 ft) above sea level)
Line frequency
Line power factor
at rated output
380 ... 480 V 3 AC ±10 % (in operation -15 % < 1 min) or
500 ... 690 V 3 AC ±10 % (in operation -15 % < 1 min) 1)
47 … 63 Hz
• Fundamental power factor (cos ϕ 1 ) > 0.96
•Total (λ) 0.75 … 0.93
Overvoltage category
Class III
to EN 60664-1
DC link voltage, approx. 2)
1.32 × line voltage under partial load
1.30 × line voltage under full load
Main contactor control
• Terminal strip X9/5-6
240 V AC/max. 8 A
30 V DC/max. 1A
Radio interference suppression
• Standard
Category C3 to EN 61800-3 up to 300 m (984 ft) total cable length
Type of cooling
Forced air cooling by means of built-in fan
Permissible ambient and coolant temperature (air)
during operation for line-side components,
Line Modules and Motor Modules
Installation altitude
Conformity
Approvals, according to
0 … 40 °C (32 … 104 °F) without derating,
> 40 … 55 °C (104 …131 °F) see derating characteristics
Up to 2000 m (6562 ft) above sea level without derating,
> 2000 ... 4000 m (6562 ... 13124 ft) above sea level,
see derating characteristics
CE (Low Voltage and EMC Directives)
cULus
1) TT system with grounded external conductor is not permissible for line voltages > 600 V.
2) The DC link voltage is unregulated and load-dependent.
For more information, see SINAMICS Low-Voltage Engineering Manual.
3/102 Siemens PM 21 · 2013