Catalog PM 21 2013 - Siemens Industry, Inc.

More documents

Recommendations

Info

© Siemens AG 2013 SINAMICS S120 drive system Motor Modules Single Motor Modules in booksize format ■ Design Single Motor Module in booksize format The Single Motor Modules in booksize format feature the following connections and interfaces as standard: • 2 DC link connections via integrated DC link busbars • 1 electronics power supply connection via integrated 24 V DC busbars • 3 DRIVE-CLiQ sockets • 1 motor connection, plug-in (not included in scope of supply) or screw-stud depending on rated output current • 1 safe standstill input (enable pulses) • 1 safe motor brake control • 1 temperature sensor input (KTY84-130 or PTC) • 2 PE (protective earth) connections The status of the Motor Modules is indicated via two multi-color LEDs. The motor cable shield is inside the connector on 50 mm (1.97 in) and 100 mm (3.94 in) wide Motor Modules. A shield connection plate can be supplied for 150 mm (5.91 in), 200 mm (7.87 in) and 300 mm (11.8 in) wide Motor Modules. On these modules, the motor cable shield can be connected using a tube clip. The signal cable shield can be connected to the Motor Module by means of a shield connection terminal, e.g. Weidmüller type KLBÜ 3-8 SC. The scope of supply of the Motor Modules includes: • DRIVE-CLiQ cable appropriate to the width of the Motor Module for connection to the adjacent Motor Module, length = width of Motor Module + 0.06 m (2.4 in) • Jumper for connecting the 24 V DC busbar to the adjacent Motor Module • Connector X21 • Connector X11 for the motor brake connection (for Motor Modules with a rated output current of 45 A to 200 A) • 2 blanking plugs for sealing unused DRIVE-CLiQ sockets • Fan insert for the 132 A and 200 A Motor Modules (the voltage for the fan insert is supplied by the Motor Module) • 1 set of warning signs in 30 languages • 1 heat conducting foil (for Motor Modules with cold plate cooling only) 3 Siemens PM 21 · 2013 3/143
SINAMICS S120 drive system Motor Modules Single Motor Modules in booksize format © Siemens AG 2013 ■ Integration Single Motor Modules communicate with the Control Unit via DRIVE-CLiQ. X200 X201 3 + Single Motor Module DRIVE-CLiQ socket 0 DRIVE-CLiQ socket 1 + M M 24 V DC busbars DCP DCN DCP DCN DC link busbars X202 DRIVE-CLiQ socket 2 2) X21 1 2 3 +Temp -Temp EP +24 V X1 U2 V2 W2 E M 3 ~ 1) 4 EP M1 LEDs M READY DC LINK 3) BR+ BR- G_D212_EN_00032g 1) Required for Safety. 2) Temperature sensor terminal for motors without DRIVE-CLiQ interface. 3) The braking signal has an integrated overvoltage protection. An external circuit of the holding brake is not necessary. Connection example of Single Motor Modules in booksize format 3 A to 30 A 3/144 Siemens PM 21 · 2013
Page 1 and 2:
© Siemens AG 2013 SIMOTION, SINAMI
Page 3 and 4:
© Siemens AG 2013 Motion Control S
Page 5 and 6:
SINAMICS S120 drive system Overview
Page 7 and 8:
SINAMICS S120 drive system System o
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
SINAMICS S120 drive system © Sieme
Page 15 and 16:
SINAMICS S120 drive system Control
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
SINAMICS S120 drive system Engineer
Page 29 and 30:
SINAMICS S120 drive system Engineer
Page 31 and 32:
SINAMICS S120 drive system Power Mo
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
SINAMICS S120 drive system Line Mod
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96: SINAMICS S120 drive system Line Mod
Page 139 and 140: SINAMICS S120 drive system Motor Mo
Page 145: SINAMICS S120 drive system Motor Mo
Page 181 and 182: SINAMICS S120 drive system DC link
Page 197 and 198:
SINAMICS S120 drive system DC link
Page 199 and 200:
SINAMICS S120 drive system DC link
Page 201 and 202:
SINAMICS S120 drive system Load-sid
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Page 213 and 214:
SINAMICS S120 drive system Suppleme
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
Page 245 and 246:
SINAMICS S120 drive system Encoder
Page 247 and 248:
Page 249 and 250:
Page 251:
show all

Catalog PM 21 2013 - Siemens Industry, Inc.

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?