Catalog PM 21 2013 - Siemens Industry, Inc.

More documents

Recommendations

Info

■ Overview © Siemens AG 2013 SINAMICS S120 drive system Load-side power components Sine-wave filter for chassis format If a sine-wave filter is connected at the Motor Module output, the voltage between the motor terminals is virtually sinusoidal. This reduces the voltage load on the motor windings and prevents motor noise induced by the pulse frequency. The pulse frequency of the Motor Modules must be set to 4 kHz for the sine-wave filters. The max. output frequency with sinewave filter is limited to 150 Hz. With chassis format units, this reduces the maximum possible output current and the maximum achievable output voltage (see characteristic curves for Single Motor Modules in chassis format and chapter System description – Dimensioning). The voltage drops across the sine-wave filter, a factor which must also be taken into account in the drive design (see chapter System description – Dimensioning). The sine-wave filter must be installed as close as possible to the Motor Module. The sine-wave filter may be operated only when the motor is connected (sine-wave filter is not no-load-proof). Operation in Servo control mode is not permissible. 3 ■ Technical specifications DC link voltage 510 ... 720 V DC Sine-wave filter 6SL3000-2CE32-3AA0 6SL3000- 2CE32-8AA0 6SL3000- 2CE33-3AA0 6SL3000- 2CE34-1AA0 Rated current A 225 225 276 333 408 Power loss kW 0.35/0.6 0.35/0.6 0.4/0.69 0.245/0.53 0.38/0.7 at 50/60 Hz Line connection Flat connector for M10 screw Flat connector for M10 screw Flat connector for M10 screw Flat connector for M10 screw Flat connector for M10 screw Load connection Flat connector for M10 screw Cable length, max. between sine-wave filter and motor • Shielded/unshielded m (ft) 300/450 (984/1476) Flat connector for M10 screw 300/450 (984/1476) Flat connector for M10 screw 300/450 (984/1476) Flat connector for M10 screw 300/450 (984/1476) Flat connector for M10 screw 300/450 (984/1476) Degree of protection IP00 IP00 IP00 IP00 IP00 Dimensions • Width mm (in) 620 (24.4) 620 (24.4) 620 (24.4) 620 (24.4) 620 (24.4) •Height mm (in) 300 (11.8) 300 (11.8) 300 (11.8) 370 (14.6) 370 (14.6) •Depth mm (in) 320 (12.6) 320 (12.6) 320 (12.6) 360 (14.2) 360 (14.2) Weight, approx. kg (lb) 124 (273) 124 (273) 127 (280) 136 (300) 198 (437) Approvals, according to cURus cURus cURus cURus cURus Suitable for Single Motor Module chassis format Type 6SL3320- 1TE32-1AA3 6SL3320- 1TE32-6AA3 6SL3320- 1TE33-1AA3 6SL3320- 1TE33-8AA3 6SL3320- 1TE35-0AA3 Suitable for Power Module in chassis format 1) Type 6SL3310- 1TE32-1AA3 • Rated current of the Single Motor Module or Power Module at a pulse frequency of 4 kHz • Type rating of the Single Motor Module or Power Module at a pulse frequency of 4 kHz 6SL3310- 1TE32-6AA3 6SL3310- 1TE33-1AA3 6SL3310- 1TE33-8AA3 A 170 215 270 330 380 6SL3310- 1TE35-0AA3 kW (HP) 90 (120) 110 (150) 132 (200) 160 (250) 200 (400) 1) Also for liquid-cooled Power Modules in chassis format. Siemens PM 21 · 2013 3/207
SINAMICS S120 drive system Load-side power components Sine-wave filter for chassis format ■ Selection and ordering data © Siemens AG 2013 3 Rated output current of the Single Motor Module or Power Module Type rating of the Single Motor Module or Power Module Suitable for Single Motor Module or Power Module in chassis format Sine-wave filter A kW (HP) Type Order No. DC link voltage 510 ... 720 V DC (line voltage 380 ... 480 V 3 AC) 210 110 (150) 6SL33 . 0-1TE32-1AA3 6SL3000-2CE32-3AA0 260 132 (200) 6SL33 . 0-1TE32-6AA3 310 160 (250) 6SL33 . 0-1TE33-1AA3 6SL3000-2CE32-8AA0 380 200 (300) 6SL33 . 0-1TE33-8AA3 6SL3000-2CE33-3AA0 490 250 (400) 6SL33 . 0-1TE35-0AA3 6SL3000-2CE34-1AA0 3/208 Siemens PM 21 · 2013
Page 1 and 2:
© Siemens AG 2013 SIMOTION, SINAMI
Page 3 and 4:
© Siemens AG 2013 Motion Control S
Page 5 and 6:
SINAMICS S120 drive system Overview
Page 7 and 8:
SINAMICS S120 drive system System o
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
SINAMICS S120 drive system © Sieme
Page 15 and 16:
SINAMICS S120 drive system Control
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
SINAMICS S120 drive system Engineer
Page 29 and 30:
SINAMICS S120 drive system Engineer
Page 31 and 32:
SINAMICS S120 drive system Power Mo
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
SINAMICS S120 drive system Line Mod
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
SINAMICS S120 drive system Motor Mo
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160: SINAMICS S120 drive system Motor Mo
Page 181 and 182: SINAMICS S120 drive system DC link
Page 201 and 202: SINAMICS S120 drive system Load-sid
Page 209: SINAMICS S120 drive system Load-sid
Page 213 and 214: SINAMICS S120 drive system Suppleme
Page 245 and 246: SINAMICS S120 drive system Encoder
Page 251: SINAMICS S120 drive system Encoder
show all

Catalog PM 21 2013 - Siemens Industry, Inc.

Create successful ePaper yourself

Delete template?

Save as template?