Catalog PM 21 2013 - Siemens Industry, Inc.

SINAMICS S120 drive system
Line Modules and line-side components
Active Line Modules in booksize format
© Siemens AG 2013
3
■ Technical specifications (continued)
Line voltage
Active Line Module in booksize format
380 … 480 V 3 AC
Internal air cooling 6SL3130-... 7TE21-6AA3 7TE23-6AA3 7TE25-5AA3 7TE28-0AA3 7TE31-2AA3
External air cooling 6SL3131-... 7TE21-6AA3 7TE23-6AA3 7TE25-5AA3 7TE28-0AA3 7TE31-2AA3
Cold plate cooling 6SL3136-... 7TE21-6AA3 7TE23-6AA3 7TE25-5AA3 7TE28-0AA3 7TE31-2AA3
Liquid cooling 6SL3135-... – – – – 7TE31-2AA3
Feed/feedback power
• Rated power P rated
- At 380 V 3 AC
- At 460 V 3 AC 5) kW
(HP)
16
(18)
36
(40)
55
(60)
80 (64 1) )
(100 (75 1) )
120 (84 1) )
(150 (100 1) )
• For S6 duty P S6 (40 %) kW 21 47 71 106 (85 1) ) 145 (116 1) )
• P max kW 35 70 91 (110) 2) ) 131 175
DC link current
• At 600 V DC A 27 60 92 134 200
• For S6 duty (40 %) A 35 79 121 176 244
•Maximum A 59 117 152 (176 2) ) 218 292
Input current
• Rated current
A 26/25/21 58/55/46 88/84/70 128/122/102 192/182/152
at 380/400/480 V 3 AC
• For S6 duty (40 %)
A 32 71 108 161 220
at 400 V
• At 400 V max. A 54 107 139 (168 2) ) 200 267
Current requirement
A 1.1 1.5 1.9 2.0 2.5 (2.1 3) )
24 V DC electronics
power supply, max.
Current carrying capacity
• 24 V DC busbars A 20 20 20 20 20
• DC link busbars A 100 200 200 200 200
DC link capacitance
• Active Line Module μF 710 1410 1880 2820 3995
• Drive line-up, max. μF 20000 20000 20000 20000 20000
Internal/external air cooling
• Power loss 4)
- Total power loss for
kW 0.29 0.67 0.95 1.39 2.26
cooling types:
internal air cooling,
external air cooling;
cold plate cooling,
liquid cooling
- With external air cooling, kW 0.09/0.2 0.17/0.5 0.25/0.7 0.3/1.0 0.55/1.71
int./ext.
• Cooling air requirement m 3 /s (ft 3 /s) 0.016 (0.565) 0.031 (1.095) 0.044 (1.554) 0.144 (5.085) 0.144 (5.085)
• Sound pressure level dB < 60 < 65 < 60 < 75 < 75
L pA (1 m)
Cold plate cooling
• Power loss, int./ext. 4) kW 0.07/0.21 0.13/0.52 0.19/0.74 0.3/1.1 0.46/1.8
• Thermal resistance R th K/W 0.075 0.055 0.05 0.028 0.028
1) In the case of cold plate cooling, derating is necessary due to heat transfer to the external heat sink.
2) Higher peak power is possible in combination with the Active Interface Module 6SL3100-0BE25-5AB0 (for operating cycle constraints,
see SINAMICS S120 Manual).
3) For 6SL3135-7TE31-2AA3.
4) Power loss of Active Line Module at rated output including losses of 24 V DC electronics power supply.
5) Nominal HP ratings are provided for ease of assigning components only. The Line Module outputs are dependent on the Motor Module loading and are to be
dimensioned accordingly.
3/112 Siemens PM 21 · 2013