Catalog PM 21 2013 - Siemens Industry, Inc.

More documents

Recommendations

Info

© Siemens AG 2013 SINAMICS S120 drive system Supplementary system components CBE20 Communication Board ■ Overview ■ Integration The CBE20 Communication Board plugs into the option slot on the CU320-2 Control Unit. The CBE20 Communication Board can be used to connect to a PROFINET IO network via a CU320-2 Control Unit. The SINAMICS S120 then assumes the function of a PROFINET IO device and can perform the following functions: • PROFINET IO device • 100 Mbit/s full duplex • Supports real-time classes of PROFINET IO: - RT (Real-Time) - IRT (Isochronous Real-Time), minimum send cycle 500 μs • Connects to controls as PROFINET IO devices using PROFIdrive compliant with Specification V4 • Standard TCP/IP communication for engineering processes using the STARTER commissioning tool • Integrated 4-port switch with four RJ45 sockets based on the PROFINET ASIC ERTEC400. The optimum topology (line, star, tree) can therefore be configured without additional external switches. • The media redundancy and shared device functions are supported. With SINAMICS firmware V4.5 and higher the CBE20 Communication Board also supports an ODVA EtherNet/IP protocol stack. ■ Technical specifications CBE20 Communication Board 6SL3055-0AA00-2EB0 Current requirement at 24 V DC Ambient temperature, permissible • Storage and transport • Operation Dimensions Weight, approx. Approvals, according to ■ Selection and ordering data Description CBE20 Communication Board Accessories Industrial Ethernet FC • RJ45 Plug 145 (1 unit) • RJ45 Plug 145 (10 units) • Stripping tool • Standard cable GP 2x2 • Flexible cable GP 2x2 • Trailing cable GP 2x2 • Trailing cable 2x2 • Marine cable 2x2 0.16 A -40 … +70 °C (-104 ... +158 °F) 0 … 55 °C (32 ... 131 °F) 130 mm × 78 mm (5.12 in × 3.07 in) 76 g (2.68 oz) cULus Order No. 6SL3055-0AA00-2EB0 6GK1901-1BB30-0AA0 6GK1901-1BB30-0AB0 6GK1901-1GA00 6XV1840-2AH10 6XV1870-2B 6XV1870-2D 6XV1840-3AH10 6XV1840-4AH10 For further information on connectors and cables, please refer to Catalog IK PI or the Siemens Industry Mall. www.siemens.com/industrymall 3 Siemens PM 21 · 2013 3/211
SINAMICS S120 drive system Supplementary system components CUA31 Control Unit Adapter © Siemens AG 2013 ■ Overview ■ Technical specifications CUA31 Control Unit Adapter 6SL3040-0PA00-0AA1 3 Current requirement at 24 V DC without DRIVE-CLiQ supply, max. 0.15 A for CUA31 + max. 0.5 A for PM340 Power Module • Conductor cross-section, max. 2.5 mm 2 Power loss < 4 W PE connection M5 screw Dimensions • Width 73 mm (2.87 in) •Height 165.8 mm (6.53 in) •Depth 37.3 mm (1.47 in) Weight, approx. 0.31 kg (0.7 lb) Approvals, according to cULus The CUA31 Control Unit Adapter converts the PM-IF interface to a DRIVE-CLiQ interface. The CUA31 Control Unit Adapter allows Power Modules in blocksize format to operate on a CU320-2 or SIMOTION D Control Unit, e.g. as a single axis next to a multiaxis drive. In this case, the CUA31 Control Unit Adapter must be the last device in the DRIVE-CLiQ link from the viewpoint of the CU320-2 or SIMOTION D Control Unit. ■ Selection and ordering data Description CUA31 Control Unit Adapter Without DRIVE-CLiQ cable Accessories for re-ordering SINAMICS/SINUMERIK/SIMOTION dust-proof blanking plugs (50 units) For DRIVE-CLiQ port Order No. 6SL3040-0PA00-0AA1 6SL3066-4CA00-0AA0 ■ Design The CUA31 Control Unit Adapter features the following connections and interfaces: • 1 temperature sensor input (KTY84-130 or PTC) • 3 DRIVE-CLiQ sockets • 1 connection for the electronics power supply via the 24 V DC power supply connector • 1 safe standstill input (enable pulses) The status of the CUA31 Control Unit Adapter is indicated via multi-color LEDs. 3/212 Siemens PM 21 · 2013
Page 1 and 2:
© Siemens AG 2013 SIMOTION, SINAMI
Page 3 and 4:
© Siemens AG 2013 Motion Control S
Page 5 and 6:
SINAMICS S120 drive system Overview
Page 7 and 8:
SINAMICS S120 drive system System o
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
SINAMICS S120 drive system © Sieme
Page 15 and 16:
SINAMICS S120 drive system Control
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
SINAMICS S120 drive system Engineer
Page 29 and 30:
SINAMICS S120 drive system Engineer
Page 31 and 32:
SINAMICS S120 drive system Power Mo
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
SINAMICS S120 drive system Line Mod
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
SINAMICS S120 drive system Motor Mo
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164: SINAMICS S120 drive system Motor Mo
Page 181 and 182: SINAMICS S120 drive system DC link
Page 201 and 202: SINAMICS S120 drive system Load-sid
Page 213: SINAMICS S120 drive system Suppleme
Page 217 and 218: SINAMICS S120 drive system Suppleme
Page 245 and 246: SINAMICS S120 drive system Encoder
Page 251: SINAMICS S120 drive system Encoder
show all

Catalog PM 21 2013 - Siemens Industry, Inc.

Create successful ePaper yourself

Delete template?

Save as template?