Catalog PM 21 2013 - Siemens Industry, Inc.

SINAMICS S120 drive system
Control Units
CompactFlash card for CU310-2
© Siemens AG 2013
3
■ Overview
The CompactFlash card contains the firmware and parameter
settings. The CompactFlash card is plugged into the appropriate
slot on the CU310-2 Control Unit.
■ Design
A CU310-2 Control Unit can perform the communication, openloop
and closed-loop control functions for one Power Module.
The performance expansion is not required in this case.
In addition to the firmware, the CompactFlash card also contains
licensing codes which are required to enable firmware options
(Safety Integrated Extended Functions in the current version).
The Safety Integrated Extended Functions must be ordered via
the order code F01 in addition to the order number.
The firmware option can also be enabled on-site, for example,
if the Safety Integrated Extended Functions are to be enabled
retrospectively. You will need the serial number of the
CompactFlash card and the Order No. of the firmware option to
be enabled. With this information, you can purchase the associated
license code from a license database and enable the firmware
option. The license code is only valid for the CompactFlash
card declared and cannot be transferred to other CompactFlash
cards.
■ Selection and ordering data
Description
CompactFlash card for CU310-2 PN
and CU310-2 DP Control Units
without safety license
including Certificate of License
CompactFlash card for CU310-2 PN
and CU310-2 DP Control Units
with safety license
including Certificate of License
and with safety license
Firmware V4.5
Firmware V4.6
Post-licensing
Safety Integrated Extended Functions
option including Certificate of License for
one axis for upgrading the license of a
CompactFlash card.
Order No.
6SL3054-0E ■00-1BA0
6SL3054-0E ■00-1BA0-Z
F01
F
G
6SL3074-0AA10-0AA0
3/18 Siemens PM 21 · 2013