Catalog PM 21 2013 - Siemens Industry, Inc.

© Siemens AG 2013
SINAMICS S120 drive system
Line Modules and line-side components
Basic Line Modules in booksize format
■ Technical specifications
Basic Line Module in booksize format
6SL313...
Line connection voltage
(up to 2000 m (6562 ft) above sea level)
Line frequency
SCCR (short-circuit current rating)
380 … 480 V 3 AC ±10 % (in operation -15 % < 1 min)
47 … 63 Hz
65 kA in conjunction with the recommended fuses class J or
circuit breakers in accordance with UL489 / CSA 22.2 No. 5-02
see recommended line-side components
Line power factor
at rated power
• Fundamental power factor (cos ϕ 1 ) > 0.96
•Total (λ) 0.75 … 0.93
Overvoltage category
Class III
to EN 60664-1
DC link voltage, approx. 1.35 × line voltage 1)
Electronics power supply 24 V DC, -15 %/+20 %
Radio interference suppression
• Standard
- 20 kW and 40 kW Basic Line Modules No radio interference suppression
- 100 kW Basic Line Module Category C3 to EN 61800-3
Total cable length up to 350 m (1148 ft) (shielded)
• With line filter Category C2 to EN 61800-3
Total cable length up to 350 m (1148 ft) (shielded)
Type of cooling
- Internal air cooling,
power units with forced air cooling using a built-in fan
- Cold plate cooling
Permissible ambient and coolant temperature (air)
during operation for line-side components,
Line Modules and Motor Modules
Installation altitude
Conformity
Approvals, according to
0 … 40 °C (32 … 104 °F) without derating,
> 40 … 55 °C (104 …131 °F) see derating characteristics
Up to 1000 m (3281 ft) above sea level without derating,
> 1000 ... 4000 m (3281 ... 13124 ft) above sea level,
see derating characteristics
CE (Low Voltage and EMC Directives)
cULus
3
1) The DC link voltage is unregulated and load-dependent.
For further information see chapter System description – Dimensioning.
Siemens PM 21 · 2013
3/65