Catalog PM 21 2013 - Siemens Industry, Inc.

© Siemens AG 2013
SINAMICS S120 drive system
Line Modules and line-side components
Active Line Modules in booksize format
■ Technical specifications (continued)
.
Line voltage
Active Line Module in booksize format
380 … 480 V 3 AC
Internal air cooling 6SL3130-... 7TE21-6AA3 7TE23-6AA3 7TE25-5AA3 7TE28-0AA3 7TE31-2AA3
External air cooling 6SL3131-... 7TE21-6AA3 7TE23-6AA3 7TE25-5AA3 7TE28-0AA3 7TE31-2AA3
Cold plate cooling 6SL3136-... 7TE21-6AA3 7TE23-6AA3 7TE25-5AA3 7TE28-0AA3 7TE31-2AA3
Liquid cooling 6SL3135-... – – – – 7TE31-2AA3
Feed/feedback power
3
• Rated power P rated
- At 380 V 3 AC
- At 460 V 3 AC 7)
Liquid cooling 2)
kW
(HP)
16
(18)
36
(40)
55
(60)
80 (64 1) )
(100 (75 1) )
120 (84 1) )
(150 (100 1) )
• Power loss, int./ext. 3) kW – – – – 0.46/1.8
- Rated volumetric flow for l/min – – – – 8
drop 4) water at 70 kPa pressure
- Volume of liquid, internal ml – – – – 100
- Coolant temperature, max.
- Without derating °C (°F) – – – – 45 (113)
- With derating °C (°F) – – – – 50 (122)
- Sound pressure level
L pA (1 m)
dB – – – – < 73
Line connection
U1, V1, W1
Screw-type
terminals (X1)
M6 screw
studs (X1)
M8 screw
studs (X1)
M8 screw
studs (X1)
M8 screw
studs (X1)
• Conductor cross-section, max. mm 2 2.5 … 10 2.5 … 50 2.5 … 95.2 × 35 2.5 … 120.2 × 50 2.5 … 120.2 × 50
Shield connection Integrated in the See Accessories See Accessories See Accessories See Accessories
connector
PE connection M5 screw M6 screw M6 screw M8 screw M8 screw
Cable length, max.
Total of all motor cables and
DC link
• Shielded m (ft) 630 (2067) 5) 630 (2067) 5) 1000 (3281) 1000 (3281) 1000 (3281)
Degree of protection IP20 IP20 IP20 IP20 IP20
Dimensions
• Width mm (in) 100 (3.94) 150 (5.91) 200 (7.87) 300 (11.8) 300 (11.8)
•Height mm (in) 380 (15.0) 380 (15.0) 380 (15.0) 380 (15.0) 380 (15.0)
- With fan 6) mm (in) – – – 629 (24.8) 629 (24.8)
- With screwed fitting mm (in) – – – 629 (24.8) 553 (21.8) 2)
•Depth
- With internal air cooling mm (in) 270 (10.6) 270 (10.6) 270 (10.6) 270 (10.6) 270 (10.6)
- With external air cooling
on/behind mounting surface
mm (in) 226/66.5
(8.90/2.62)
226/71
(8.90/2.80)
226/92
(8.90/3.62)
226/82
(8.90/3.23)
226/82
(8.90/3.23)
- With cold plate cooling mm (in) 226 (8.90) 226 (8.90) 226 (8.90) 226 (8.90) 226 (8.90)
- With liquid cooling mm (in) – – – – 226 (8.90)
Weight, approx.
• With internal air cooling kg (lb) 7 (15) 10.3 (23) 17 (37.5) 23 (51) 23 (51)
• With external air cooling kg (lb) 8.8 (19) 13.8 (30) 18.5 (41) 27.7 (61) 30.7 (68)
• With cold plate cooling kg (lb) 6.1 (13) 10.2 (22.5) 13.8 (30) 20.3 (45) 20.4 (45)
• With liquid cooling kg (lb) – – – – 23 (51)
1) In the case of cold plate cooling, derating is necessary due to heat transfer to the external heat sink.
2) The coolant connections are located on the lower side of the components. All connection elements can be accessed using an appropriate tool.
Thread type of water connections: Pipe thread ISO 228 G ½ B.
3) Power loss of Active Line Module at rated power including losses of 24 V DC electronic power supply.
4) This value applies to water as coolant; for other coolants, refer to the SINAMICS S120 Manual.
5) Max. cable lengths in conjunction with Active Interface Module and Basic Line Filter (Category C3 in accordance with EN 61800-3).
6) The fan is supplied with the Active Line Module and must be installed before the Active Line Module is commissioned.
7) Nominal HP ratings are provided for ease of assigning components only. The Line Module outputs are dependent on the Motor Module loading and are to be
dimensioned accordingly.
Siemens PM 21 · 2013
3/113