Catalog PM 21 2013 - Siemens Industry, Inc.

More documents

Recommendations

Info

© Siemens AG 2013 SINAMICS S120 drive system Motor Modules Double Motor Modules in booksize compact format ■ Technical specifications Double Motor Module in booksize compact format 6SL3420-2TE1... DC link voltage (up to 2000 m (6562 ft) above sea level) Output frequency 510 ... 720 V DC (line connection voltage 380 ... 480 V 3 AC) • Control type Servo 0 … 650 Hz 1) • Control type Vector 0 … 300 Hz 1) • Control type V/f 0 … 600 Hz 1) Electronics power supply 24 V DC -15 %/+20 % Type of cooling The devices are designed so that - Internal air cooling (power units with forced air cooling through built-in fans) or - cold plate cooling is possible. Permissible ambient and coolant temperature (air) during operation for line-side components, Line Modules and Motor Modules Installation altitude Conformity Approvals, according to Safety Integrated 0 … 40 °C (32 … 104 °F) without derating, > 40 … 55 °C (104 …131 °F) see derating characteristics Up to 1000 m (3281 ft) above sea level without derating, > 1000 ... 4000 m (3281 ... 13124 ft) above sea level, see derating characteristics CE (Low Voltage and EMC Directives) UL-recognized Safety Integrity Level 2 (SIL2) acc. to IEC 61508, Performance Level d (PLd) acc. to ISO 13849-1 and Control Category 3 acc. to ISO 13849-1 or EN 954-1. For further information see chapter Safety Integrated. 3 1) Note the correlation between max. output frequency, pulse frequency and current derating. For further information see chapter System description – Dimensioning. Siemens PM 21 · 2013 3/167
SINAMICS S120 drive system Motor Modules Double Motor Modules in booksize compact format ■ Technical specifications © Siemens AG 2013 3 DC link voltage Double Motor Module in booksize compact format 510 … 720 V DC Internal air cooling/ 6SL3420-2TE11-7AA1 6SL3420-2TE13-0AA1 6SL3420-2TE15-0AA1 cold plate cooling Output current • Rated current I rated A 2 × 1.7 2 × 3 2 × 5 • For S6 duty (40 %) I S6 A 2 × 2 2 × 3.5 2 × 6 • Base-load current I H A 2 × 1.5 2 × 2.6 2 × 4.3 • I max A 2 × 5.1 2 × 9 2 × 15 Type rating 1) • Based on I rated kW (HP) 2 × 0.9 (0.75) 2 × 1.6 (1.5) 2 × 2.7 (3) • Based on I H kW (HP) 2 × 0.8 (0.5) 2 × 1.4 (1) 2 × 2.3 (2.5) Rated pulse frequency kHz 8 8 8 2) DC link current I d A 4.1 7.2 12 Current carrying capacity • DC link busbars A 100 100 100 • 24 V DC busbars 3) A 20 20 20 DC link capacitance μF 110 110 220 Current requirement A 1 1 1 at 24 V DC, max. Power loss 4) • With internal air cooling kW 0.11 0.13 0.19 in control cabinet • With cold plate cooling kW 0.04/0.07 0.04/0.09 0.06/0.135 int./ext. • Thermal resistance R th K/W 0.22 0.22 0.22 Cooling air requirement m 3 /s (ft 3 /s) 0.008 (0.283) 0.008 (0.283) 0.008 (0.283) Sound pressure level L pA (1 m) dB < 60 < 60 < 60 Motor connection U2, V2, W2 2 × connectors (X1, X2) with screw-type terminals 2 × connectors (X1, X2) with screw-type terminals 2 × connectors (X1, X2) with screw-type terminals • Conductor cross-section mm 2 0.2 … 6 0.2 … 6 0.2 … 6 Shield connection Integrated in connector (X1, X2) Integrated in connector (X1, X2) Integrated in connector (X1, X2) PE connection M5 screw M5 screw M5 screw Motor brake connection Connector (X11, X12), 24 V DC, 2 A Connector (X11, X12), 24 V DC, 2 A Connector (X11, X12), 24 V DC, 2 A Motor cable length, max. • Shielded m (ft) 50 (164) 50 (164) 50 (164) • Unshielded m (ft) 75 (246) 75 (246) 75 (246) Degree of protection IP20 IP20 IP20 Dimensions • Width mm (in) 75 (2.95) 75 (2.95) 75 (2.95) •Height mm (in) 270 (10.6) 270 (10.6) 270 (10.6) •Depth mm (in) 226 (8.90) 226 (8.90) 226 (8.90) Weight, approx. kg (lb) 3.4 (7.50) 3.4 (7.50) 3.4 (7.50) 1) Rated power of a standard asynchronous (induction) motor at 600 V DC link voltage. 2) Rated DC link current for dimensioning an external DC connection. For DC link current calculation for dimensioning the Line Module, see chapter System description – Dimensioning. 3) If, due to a number of Line Modules and Motor Modules being mounted side-by-side, the current carrying capacity exceeds 20 A, an additional 24 V DC connection using a 24 V terminal adapter is required (max. cross-section 6 mm 2 , max. fuse protection 20 A). 4) Power loss of Motor Module at rated power including losses of 24 V DC electronics power supply. 3/168 Siemens PM 21 · 2013
Page 1 and 2:
© Siemens AG 2013 SIMOTION, SINAMI
Page 3 and 4:
© Siemens AG 2013 Motion Control S
Page 5 and 6:
SINAMICS S120 drive system Overview
Page 7 and 8:
SINAMICS S120 drive system System o
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
SINAMICS S120 drive system © Sieme
Page 15 and 16:
SINAMICS S120 drive system Control
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
SINAMICS S120 drive system Engineer
Page 29 and 30:
SINAMICS S120 drive system Engineer
Page 31 and 32:
SINAMICS S120 drive system Power Mo
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
SINAMICS S120 drive system Line Mod
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120: SINAMICS S120 drive system Line Mod
Page 139 and 140: SINAMICS S120 drive system Motor Mo
Page 169: SINAMICS S120 drive system Motor Mo
Page 181 and 182: SINAMICS S120 drive system DC link
Page 201 and 202: SINAMICS S120 drive system Load-sid
Page 213 and 214: SINAMICS S120 drive system Suppleme
Page 221 and 222:
SINAMICS S120 drive system Suppleme
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
Page 245 and 246:
SINAMICS S120 drive system Encoder
Page 247 and 248:
Page 249 and 250:
Page 251:
show all

Catalog PM 21 2013 - Siemens Industry, Inc.

Create successful ePaper yourself

Delete template?

Save as template?