Catalog PM 21 2013 - Siemens Industry, Inc.
Catalog PM 21 2013 - Siemens Industry, Inc.
Catalog PM 21 2013 - Siemens Industry, Inc.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
■ Overview<br />
© <strong>Siemens</strong> AG <strong>2013</strong><br />
SINAMICS S120 drive system<br />
Load-side power components<br />
Sine-wave filter for chassis format<br />
If a sine-wave filter is connected at the Motor Module output, the<br />
voltage between the motor terminals is virtually sinusoidal. This<br />
reduces the voltage load on the motor windings and prevents<br />
motor noise induced by the pulse frequency.<br />
The pulse frequency of the Motor Modules must be set to 4 kHz<br />
for the sine-wave filters. The max. output frequency with sinewave<br />
filter is limited to 150 Hz.<br />
With chassis format units, this reduces the maximum possible<br />
output current and the maximum achievable output voltage (see<br />
characteristic curves for Single Motor Modules in chassis format<br />
and chapter System description – Dimensioning).<br />
The voltage drops across the sine-wave filter, a factor which<br />
must also be taken into account in the drive design<br />
(see chapter System description – Dimensioning).<br />
The sine-wave filter must be installed as close as possible to the<br />
Motor Module.<br />
The sine-wave filter may be operated only when the motor is<br />
connected (sine-wave filter is not no-load-proof). Operation in<br />
Servo control mode is not permissible.<br />
3<br />
■ Technical specifications<br />
DC link voltage<br />
510 ... 720 V DC<br />
Sine-wave filter<br />
6SL3000-2CE32-3AA0<br />
6SL3000-<br />
2CE32-8AA0<br />
6SL3000-<br />
2CE33-3AA0<br />
6SL3000-<br />
2CE34-1AA0<br />
Rated current A 225 225 276 333 408<br />
Power loss<br />
kW 0.35/0.6 0.35/0.6 0.4/0.69 0.245/0.53 0.38/0.7<br />
at 50/60 Hz<br />
Line connection<br />
Flat connector for<br />
M10 screw<br />
Flat connector for<br />
M10 screw<br />
Flat connector for<br />
M10 screw<br />
Flat connector for<br />
M10 screw<br />
Flat connector for<br />
M10 screw<br />
Load connection<br />
Flat connector for<br />
M10 screw<br />
Cable length, max.<br />
between sine-wave filter<br />
and motor<br />
• Shielded/unshielded m (ft) 300/450<br />
(984/1476)<br />
Flat connector for<br />
M10 screw<br />
300/450<br />
(984/1476)<br />
Flat connector for<br />
M10 screw<br />
300/450<br />
(984/1476)<br />
Flat connector for<br />
M10 screw<br />
300/450<br />
(984/1476)<br />
Flat connector for<br />
M10 screw<br />
300/450<br />
(984/1476)<br />
Degree of protection IP00 IP00 IP00 IP00 IP00<br />
Dimensions<br />
• Width mm (in) 620 (24.4) 620 (24.4) 620 (24.4) 620 (24.4) 620 (24.4)<br />
•Height mm (in) 300 (11.8) 300 (11.8) 300 (11.8) 370 (14.6) 370 (14.6)<br />
•Depth mm (in) 320 (12.6) 320 (12.6) 320 (12.6) 360 (14.2) 360 (14.2)<br />
Weight, approx. kg (lb) 124 (273) 124 (273) 127 (280) 136 (300) 198 (437)<br />
Approvals, according to cURus cURus cURus cURus cURus<br />
Suitable for<br />
Single Motor Module<br />
chassis format<br />
Type 6SL3320-<br />
1TE32-1AA3<br />
6SL3320-<br />
1TE32-6AA3<br />
6SL3320-<br />
1TE33-1AA3<br />
6SL3320-<br />
1TE33-8AA3<br />
6SL3320-<br />
1TE35-0AA3<br />
Suitable for<br />
Power Module<br />
in chassis format 1) Type 6SL3310-<br />
1TE32-1AA3<br />
• Rated current<br />
of the Single Motor Module<br />
or Power Module<br />
at a pulse frequency of 4 kHz<br />
• Type rating<br />
of the Single Motor Module<br />
or Power Module<br />
at a pulse frequency of 4 kHz<br />
6SL3310-<br />
1TE32-6AA3<br />
6SL3310-<br />
1TE33-1AA3<br />
6SL3310-<br />
1TE33-8AA3<br />
A 170 <strong>21</strong>5 270 330 380<br />
6SL3310-<br />
1TE35-0AA3<br />
kW (HP) 90 (120) 110 (150) 132 (200) 160 (250) 200 (400)<br />
1) Also for liquid-cooled Power Modules in chassis format.<br />
<strong>Siemens</strong> <strong>PM</strong> <strong>21</strong> · <strong>2013</strong><br />
3/207