inSync Private Cloud 5.2 - inSync Help - Druva

inSync 5.2 Private Cloud – Administrator’s Guide
Field
Description
Enable Seeding
Select if you want to enable seeding from the primary storage to the
secondary storage. If selected, all remaining fields on the page are
displayed.
Populate secondary
storage daily at
Select the start time and duration for daily seeding. For example, you
may configure the seeding to start every day at midnight and continue
for the next 6 hours. Seeding to the secondary storage will stop at
6:00 AM even if all changes have not been seeded.
Additionally, populate
weekly on
Select the day for the weekly data seeding from the primary storage to
the secondary storage.
Note: Daily seeding will not be triggered on the day weekly seeding is
scheduled.
Populate secondary
storage weekly at
Select the start time and duration for weekly seeding. For example,
you may configure the seeding to start every Saturday at midnight and
continue for the next 6 hours.
Use dedicated IP/FQDN for
destination
Select if you want to use a dedicated IP or fully qualified domain name
to seed the secondary storage. If not selected, you can only select
from the listed IP addresses in the IP/FQDN for destination field.
IP/FQDN for destination
Select or enter the IP or fully qualified domain name to seed the
secondary storage.
Limit bandwidth
consumption to
Specify the maximum bandwidth that can be used to seed the
secondary storage. To remove any restrictions on the bandwidth,
enter 0 KBps or 0 MBps,
176