12.07.2015 Views

power distribution - Siemens

power distribution - Siemens

power distribution - Siemens

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

General Layout Information (Type SB1, SB2, SB3, IPS)Panel Mounted MCCB — 400A through 1200AIPS service sections can house botha main service disconnect device andbranch disconnects. Switchboardscan be furnished with “Suitable forUse Only as Service Equipment”labels, but include no provisions forutility metering.Branch circuit device unit space varies,depending on the rating and consequentphysical size of the main disconnectdevice. If more unit space is requiredthan is shown in the tables below, oneor more additional panel mounted device<strong>distribution</strong> sections must be added.KK400-1200A Main Breaker Without GFPLConduit AreaTop or BottomL400 -1200A Main Breaker With GFPKKLConduit AreaTop or BottomL12 SWITCHBOARDSM C BUnitSpaceHUnitSpaceHM/BGFWDWDFig. 1 Top Entrance (Invert for bottom entrance)Fig. 2 Bottom Entrance (Invert for top entrance)Main Breaker with or without Ground Fault ProtectionDimensions in inches (mm)Max. Conduit Area ServiceAmpere Breaker Height Unit Space Width Minimum Main EntranceRating Type (H) (W) Depth (D) K L Location LabelJXD2, JXD6, JD6,400HJD6, HJXD6,HHJD6, HHJXD6,SJD6, SHJD656.25 (1429)LXD6, LD6, HLD6,HLXD6, HHLD6,600HHLXD6, SLD6,32.00 (813)SHLD6LMD6, LMXD6,90.00 13.75 2.50 3.00 Top orHLMD6, HLMXD6,(2286)53.75 (1365)(349) (64) (76) BottomNM, HM, LM800 MXD6, MD6,HMD6, HMXD652.50 (1334)SMD6, SHMD6 40.00 (1016)NXD6, ND6,1000 HND6, HNXD6, 52.50 (1334)NN, HN, LN38.00 (965) SND6, SHND6 40.00 (1016)NXD6, ND6,1200 HND6, HNXD6,52.50 (1334)NN, HN, LNSND6, SHND6 40.00 (1016)YesYes Ground fault, if applied, uses 10 in. (254 mm) of unit space. See page 12-12 for unit space requirements for disconnect devices. Available unit space for 400 and 600 amp main breaker sections is reduced to53.75 if load side through bus is required. Optional section depths are 20", 28" and 38". Optional 70" high is also available. Unit space is reduced by 20". 46 in. (1168 mm) wide if 750 kcmil or compression lugs required.<strong>Siemens</strong> Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 12-9

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!