power distribution - Siemens

Multi-Metering SwitchboardsType SMMGeneralFigure A Figure B Figure C Figure D SWITCHBOARDS1220" 32" 20" 32" 26"SMM/SMD Sections with Space for Tenant Mains/Meter SocketsTable 7.4.6.19 SMM Sections With Space For CB Mains And Sockets Sockets Figure3 A6 BTable 7.4.6.20 SMD Sections With Space For CB Mains And Sockets 3 A6 BTable 7.4.6.21 SMM Sections With Space For T-Fuse Mains And Sockets 3 A6 BTable 7.4.6.22 SMD Sections With Space For T-Fuse Mains and Sockets 3 A6 BTable 7.4.6.23 SMM Sections With Space For VB Mains And Sockets 2 C6 D2 C6 DTable 7.4.6.24 SMD Sections With Space For VB Mains And Sockets 2 C6 D2 C6 DNOTE: Component priced Meterboards allow for any combination of 100 and 200 ampere tenantmains or blank positions. Select the base structure, meter sockets and tenant mains accordingly.SMM sections–Cross bus from 800–2500 ampere.Sections 20" deep.Price sockets with tenant mains from Table 7.4.6.25,7.4.6.26, 7.4.6.27. Price sockets only from Table 7.4.6.28.Cross bus is not included. Price from Table 7.4.6.29or 7.4.6.30.When load cables exit top of section, rear load barrier(RLB) must be priced. See Table 7.4.6.31.SMD sections required for cross bus exceeding2500 ampere. Sections 28" deep.Fuses not included. For Class J fuse provisions, changeR to J.26" wide for Outdoor Type 3R.38" wide for Outdoor Type 3R.35" wide for Outdoor Type 3R.12-16Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog