power distribution - Siemens

Motor Control Center Replacement UnitsModel 95Aftermarket OverviewProduct Description (Time Line: 1995 — 1997)The Model 95 was originally manufactured in Raleigh, NC.Model 95 served as a style template for many old MCCbuckets since installation procedures and dimensions stayedthe same. Unit widths are normally 15" or 20" wide, and 12"tall with 6" increments.The original Model came with a variety of CB and startersfrom ITE, C-H and Siemens 3TF & 3UA Overload. Today, weprovide you with Siemens breakers and starters. The standardlead-time for delivery is 24 hrs – 3 weeks.15MOTOR CONTROLCENTERSModel 90Replacement CapabilitiesStarter UnitsReplacement starters are available for all plug-in and Nonplug-in units. A complete unit for adding to an existing MCCincludes a unit door, divider pans and all necessary mountinghardware. Features of the replacement units include:▪ Siemens Starter Size 1-6▪ CT, CPT, PT▪ CB and fusible▪ Pilot Devices▪ Relays and FusesProduct Description (Time Line: 1986 — 1997)The Model 90 retrofit buckets are designed to fit into Model90 MCCs. Unit widths are normally 15" or 20" wide, and 12"tall with 6" increments.The original Model came with a variety of CB and startersfrom ITE, C-H, and Siemens 3TF & 3UA Overload. Today, weprovide you with Siemens breakers and starters. The standardlead-time for delivery is 24 hrs – 3 weeks.Replacement CapabilitiesStarter UnitsReplacement starters are available for all plug-in and Nonplug-in units. A complete unit for adding to an existing MCCincludes a unit door, divider pans and all necessary mountinghardware. Features of the replacement units include:▪ Siemens Starter Size 1-6▪ CT, CPT, PT▪ CB and Fusible▪ Pilot Devices▪ Relays and Fuses15-12Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog