power distribution - Siemens

Low Voltage SwitchgearType WL Low Voltage Metal-Enclosed SwitchgearDimensionsIndoor Front Elevation ViewIndoor Floor Plan and Cable Space Details1.25(32)typ..86(22)4.42 (112).75 (19) typ..75 (19) typ.1.50(38).86(22)5.86(149) 7.88 (200)4.82(122)B13SWITCHGEARATransformerThroatLiquid filled &outdoor dry typetransformers onlyC L14.9(378)Maximum availablespace in top or bottomof unit for customer'spower cables(4) Holes for.50 (12mm)Grade 5anchor boltsSpace forsecondaryleads fromabove2.00 (51)5.00(127)4.00(102)4.00(102) 1.00(25)2.12(54)3.00 (76)End Trim Panel (typ.)Required on left andright end of switchgearlineup — adds 2”to total lineup widthDSpace forsecondaryleads frombelow7.00(179)C2.37 (60)4.40 (112)1.00 (25)W1.00 (25)2.00 (51)W = 22 (559) or 32 (813)A Equipment DepthDirection of Cables B C D60" Non-Fused with(N, S, H or L-Rating Breakers)Below21.50 (546) 13.88 (353) 32.59 (828)OR65" Fused with (F-Rating Breakers)Above 21.25 (540) 18.88 (480) 37.59 (955)70" Non-fused with(N, S, H or L-Rating Breakers)Below 31.50 (800) 13.88 (353) 32.59 (828)OR75" Fused with (F-Rating Breakers) Above 31.25 (794) 18.88 (480) 37.59 (955)80" Non-fused with Below 41.50 (1054) (N, S, H or L-Rating Breakers) Above 41.25 (1048) 13.88 (353) 32.59 (828)80" Fused with Below 36.50 (927) (F-Rating Breakers) Above 36.25 (921) 18.88 (480) 37.59 (955)Note: Dimensions shown in inches and (mm). Reduce by 7.88" if upper neutral is present with cables above or if a lower neutral is present with cables below. Reduce by 4.00" if an 800-3200A breaker is located in the bottom compartment.Reductions per notes 1 & 2 are additive. Example: cables below + lower neutral + 2000A breaker in bottom compartment = B-11.88. Reduce cable space by 4.00" x 4.82" if Neutral Riser is present. (Consult Factory). 4.10 (104) if W=22; 4.60 (117) if W=32.For more information, please visit http://automation.usa.siemens.com/consultant/ or contact your local sales office.13-46Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog