power distribution - Siemens

Lighting and Heating ControlElectrically Held Lighting ContactorsFeaturesApplication▪ Compact Design▪ Silver Cadmium Oxide Contacts▪ Pressure Type Terminals▪ Straight Thru Wiring▪ Wide Variety of Contact Configurations▪ 12-Poles Maximum▪ Available From 20 Amps–400 AmpsUp to 12-Poles 20, 30 and 60 Amps3-Poles On 100–400 Amps▪ Full Line of EnclosuresNEMA 1NEMA 3R/12NEMA 4/4X (Stainless Steel)▪ Available In Combination Form withChoice of:Fusible DisconnectNon-Fusible DisconnectCircuit Breaker▪ All Combination Lighting Contactorsare UL Service Entrance Listed▪ Full Line of Factory And FieldModifications▪ UL Listed Files #E14900▪ CSA Certified File LR 6535Siemens electrically held lightingcontactors provide a safe, convenientmeans of local or remote switchingfor tungsten and ballast lamp loads,mercury arc lamps, and 3-phaseresistive heating.Class LE electrically held lightingand heating contactors are used inapplications where it is not critical thatthe contacts remain in the closedposition during loss of control power.These lighting contactors are rated at480V Tungsten, 600V Ballast. They areavailable in 2–12 poles with a variety ofNO and NC contact arrangements.Typical applications include:▪ Industrial and Commercial Buildings▪ Stadiums▪ Airports▪ Non-Critical Resistive Heaters andother Non-Inductive LoadsGeneralNEMA & GeneralPurpose ControlCONTROLPRODUCTS1616-68Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog