2018-2019 Horticultural Catalog

Hydro Seeding Systems
Turbo Turf HS-100
Hydro Seeding System
The HS-100 is ideal for installing a new lawns, lawn repair
and renovation, golf courses, cemeteries, installation of
irrigation systems or water lines. Mixing time in this unit
is 2-5 minutes and complete dispersion of the tank is 3-4
minutes. The materials used in one load, would consist
of a half bale of hydro seeding mulch, the approximate
fertilizer for 1300 square feet, (liquid, water soluble,
or granular).
Features:
• Holds 100 gallons
• Seeds 1300 square feet per load
• 4 Horsepower Honda engine with a 2” x 2”
high volume, centrifugal pump
• 100’ of 1 ¼ discharge hose (with capabilities
of adding an additional 50’ of hose), gun, and
three nozzles (1 wide hydro seeding nozzle,
1 straight distance nozzle, and 1 trim nozzle)
• Empty weight is 210 lbs.
• The loaded weight is 1010 pounds
• Physical dimensions 27” W x 56” L X33”H
• Unit may be placed in the back
of a compact pickup or utility vehicle
• Material is applied at approx. 30 G.P.M.
• Spray distance is 40’
• Poly tank, never rusts
• Ability to mix partial loads
Catalog # Each
• Continuous agitation with few moving parts
• Ability to control the flow at the gun instead
of making adjustments at the unit
08-01820 $ 2,300.00
SHIPPED FOB: Pennsylvania
Turbo Turf HS-150 Hydro
Seeding System
The HS-150-P is ideal for repairing wear along
cart paths on golf courses, for a cemeteries,
schools, construction repairs such as installation
of irrigation systems or water lines, and for lawn
repair and renovation. Mixing time
in this unit is 2-5 minutes and complete
dispersion of the tank is 4-5 minutes. Materials
used in one load would be 3/4 - 1 bale of hydro
seeding mulch, the appropriate amount of seed
for 2000 sq. ft. and the appropriate fertilizer
for 2000 square feet (liquid, water soluble, or
granular).
Features:
• Pull type hydro seeding system
• Pin hitch and two 20 x10.0 x 8 tires on
demountable hubs
• Seeds 2000 square feet/load
• 6.5 Horsepower Honda engine with a 2” X 2”
high-volume centrifugal pump
• 100’ of ¼” discharge hose, a gun, and three
nozzles (1 wide hydro seeding nozzle,
1 straight distance nozzle, and 1 trim nozzle)
• Empty weight is 380 lbs.
• The loaded weight is 1580 lbs.
• Physical dimensions are 41”W x 84”L x 52”H
• Material is applied at approximately 30 G.P.M.
• Spray distance is 60’
• Poly tank, never rusts
• Ability to mix partial loads
• Continuous agitation with few moving parts
Catalog # Each
08-01840 $ 3,300.00
SHIPPED FOB: Pennsylvania
hydro seeding systems
800-325-3055
www.hummert.com
153