2018-2019 Horticultural Catalog

Seasonal Retail Greenhouses Garden Mart
Specifications:
T
he Garden Mart is designed to be a modular, low cost and
movable sales building for added spring plant sales. Our
most popular selling model has been engineered for superior
strength, easy future expansion and dramatically simplified setup.
It offers protection for your plants and shopping comfort for your
customers. You can custom configure it with many different options
to suit your specific needs.
Standard Features
• Roof and End Wall Poly Film – Choose from white or clear 6 mil,
4 year poly with Wiggle Wire attachment system
• Hold Down System – Choose from water tubes, ground stakes or
leg stands to suit your needs
• Integrated Center Benching – Choice of either Flat Stacker or Tiered
• Four Runs of Hanging Basket Purlins – Display your baskets
attractively and within easy reach for your customers
• Double Sliding End Door – Six foot wide, double door slides out of
the way to allow your customers and carts easy access. Optional
additional end door provides flow-through customer traffic
• Ventilation Options – Select either slide side or roll up side ventilation;
both allow you to easily control the climate of your structure
Poly-Tex garden mart
• Width: 21’
• Length: 30’-96’ (in 6’ sections)
• Sidewall Height: 6’
• Height to Apex: 11’- 4”
• Frame Spacing: 6’
• Door: (2) 3’ wide x 6’8” high
Slide-Side base package includes:
2” O.D. 14 gauge galvanized snap-button
frame, diagonal wind braces, (4) full-length
runs of hanging basket purlin, integrated center
and side bench support brackets, Slide-Side
ventilation, (1) set of double sliding end doors,
ground stakes or water tube hold-down, clear
or white single-layer 6 mil 4 year roof and end
wall poly, Wiggle Wirepoly fastening system,
assemble hardware and assembly instructions.
Standard bench package includes:
(2) full-length runs of two-tier galvanized
standard bench tops and your choice of flat
stacker or tiered center standard bench tops.
The center benching allows for a 6’ walk-around
on each end to create a racetrack layout inside
the greenhouse. The standard benches use
connected “slats” of galvanized metal to create
the bench top and are the less expensive
alternative when buying bench tops for your
Garden Mart. They are perfect for displaying
flats or any product that is more than 3” wide.
If you need the versatility to be able to display
smaller items, then our expanded metal bench
tops are for you.
Garden Mart with Slide-Side and Standard benches
10”
Benching Flat Basket Catalog
Size (sq. ft.) Cap Cap Number Each
21’ x 30’ 486 324 120 45-80050 $ 6,750.00
21’ x 36’ 612 408 144 45-80070 8,030.00
21’ x 42’ 738 492 168 45-80080 9,300.00
21’ x 48’ 864 576 192 45-80150 10,580.00
21’ x 60’ 1,116 744 240 45-80250 13,130.00
21’ x 96’ 2,016 1190 384 45-80450 20,780.00
Snap Button Design
Simple and strong. The snap button
connection system decreases your
set up time and provides added
strength.
Add for optional rear door 45-80410 280.00
SHIPPED FOB: Minnesota
SLIDE-SIDE
VENTING
SLIDING
END DOOR
STANDARD BENCHING
Optional Expanded Metal bench package includes:
Same layout as the standard bench package but with the
upgraded expanded metal bench tops. The expanded
metal bench tops are great if you are planning to display
small items or hard goods not in trays or flats.
Catalog
Size Number Each
21’ x 30’ 45-80300 $ 980.00
21’ x 36’ 45-80310 1,240.00
21’ x 42’ 45-80330 1,510.00
21’ x 48’ 45-80320 1,760.00
21’ x 60’ 45-80340 2,300.00
21’ x 96’ 45-80360 3,900.00
468 800-325-3055
www.hummert.com