2018-2019 Horticultural Catalog

CO2 Monitor & Remote
Sensor
• The CO2 Safety Alarm is designed to protect
customers and workers near stored carbon dioxide
(CO2)
• The monitor has both audible and visual alarms,
with 2 built-in relays to trigger the alarms at
different user-defined CO2 levels, and a control
ventilation fan or an HVAC control switch
• The CO2 Sensor is easy to install and use. Simply
mount both units, plug the display unit into a
standard wall jack, and the alarms are ready.(all
cables and hardware included)
Features:
• The monitor connects with the Remote Display Unit
using the 25’ supplied cable
• The monitor has a large digital LCD display and
clearly indicates the current CO2 level/temperature
• The relays automatically control fans or blowers to
ventilate confined spaces
• The monitor has an 80dB audible
and visual alarm indications
Specifications:
• Measurement Range: 0-5% (50,000ppm)
CO2 Sensor
• CO2 Alarms: Relay 1: 1.5%. Relay 2: 3%
CO2 (configurable)
• Alarm Response Time: < 60 seconds
• Operating Temperature: 0-50 degrees
Centigrade (32-122F)
Electrical:
• Power Supply: 110-220VAC to 6VDC
Adapter
• Meets National Boiler Inspection Code
(NBIC) for CO2 Monitoring and OSHA, IFC
and NFPA code requirements for CO2
Catalog # Each
28-01400 $ 500.00
CO2 Monitors & Controllers
SHIPPED FOB: Florida
Day & Night CO2 Meter
• The Day/Night CO2 Controller can be used in greenhouses,
growing rooms where elevated carbon dioxide levels are used to
maximize plant growth
• Provides accurate Generator Control
• Photo Sensor turns off CO2 at night
• The target level is set and is maintained
• When CO2 levels get too low, power is supplied to a CO2
generator or regulator via the built-in 100-240 VAC 5A piggyback
power cord
• When the target level is reached, the power is turned off
• The CO2 Monitor & Controller has a built-in photo sensor that
overrides the CO2 control and shuts off the CO2 when it senses
darkness. Photo sensor control saves dollars/energy by ensuring
the supply of CO2 during the light cycle when it is needed
• The CO2 Meter is easy to install and use. Mount the unit inside
your greenhouse or growing area plug it into a standard wall jack,
plug in your CO2 generator or regulator and
it is ready to maximize your plant growing
yields.(all cables and hardware included)
Features:
• Large digital LCD display clearly indicates the
current CO2 level and temperature
• Easy to read display with all functions set
from 3 push buttons
• Power, upper limit, lower limit and photo
sensor verification LEDs
Includes solenoid valve & tank regulator:
• This is an accurate, easy to adjust CO2
regulator and flow meter that supports
from 10 to 60 cubic feet per hour with an
electronic solenoid valve
• Comes with a tank pressure gauge, easy-toread
square-shaped flow meter, and 6 foot
power cord
• Works with any 120VAC control device
SHIPPED FOB: Florida
Catalog # Each
28-01420 $ 285.00
Model RAD-0501
Solenoid Valve &
Tank Regulator
Included!
Model RAD-0102
co 2 monitors & controllers
800-325-3055
www.hummert.com
63