2018-2019 Horticultural Catalog

field management • environment readers
The easy-to-use, affordable, remote field
monitoring system for making critical
crop decisions.
EnviroMonitor lets you add almost any sensor
you need (dozens of the most popular industry
standard sensors) anywhere you need it, in
your microclimate. As your needs grow and
change, you can add or move sensors to
create an affordable field system with Cloudbased
data and user-friendly software.
How It Works
• You choose the sensors you need. Select
from Davis or third-party sensors.
• Install the sensors and connect them to
Nodes (up to four sensors per Node).
• Pair Nodes to the Gateway (up to 20
Nodes per Gateway) using easy,
step-by-step directions in our EnviroMonitor
configuration app.
• The Nodes form a secure, self-optimizing,
self-healing network, transmitting data from
sensors to the Gateway or another Node.
Data flows automatically from your fields to
your smartphone.
5. Personalized software offers custom
alerts, team set-up, and more–all to help
you streamline farm management
processes. Access your data on
WeatherLink.com as well as through
Mobilize, our powerful management app.
Catalog # Each
48-06000 $ 205.00
The THERMALARM
greenhouse
monitoring system
will set off an
alarm whenever the
temperature reaches
the high or low set
point. Easy to install
and use.
Gateway
Node
Wind-CFM Temperature
Anemometer
• Simultaneous display of
ambient temperature and air flow
or air velocity
• Data Hold and Min/Max
with Auto Power Off
• Complete with vane sensor with
3.9’ cable, 9V battery, rubber
holster/carrying case
• Displays air flow in:
CMM(m 3 /min)= 0 - 9999
CFM (ft 3 /min) = 0 - 9999
• Air velocity with ±3% accuracy
m/s = .40 - 30; Km/h = 1.4 - 108
ft/min = 80 5906; mph = .9 - 67.2
Knots = .8 - 58.3
• Air temperature: 14-140ºF (-10 -
60ºC) with ±6ºF
Greenhouse Monitoring System
• Uses hermetically sealed magnetic switches to trigger an alarm condition,
eliminating corrosion and particle contamination. Important where chemical
fumes, high humidity and airborne dust and dirt particles are present
• The adjustable set-hands extend through the bottom of the instrument
so fingertips can be used to adjust the high and low limits - no tools!
• Airflow through the opening at the bottom of the instrument case
allows it to sense air temperature change more rapidly
• Temperature range: 20ºF to 110º F
Additional ranges are available on special order
Price per Each
Description Catalog # 1-11 12 & up
Thermalarm 48-00800 $ 63.75 $ 54.83
18 GAUGE 2 CONDUCTOR COPPER WIRE-INSULATED
Each
100’ Coil 19-09100 $ 27.90
Price per Each
1’-499’ 500’ & up
Per foot 19-09030 $ 0.30 $ 0.20
EnviroMonitor Field
Management System
The EnviroMonitor Gateway
collects all data from the
Nodes and pushes it securely
to the Cloud using cellular
connectivity. From there, the
data can be accessed on your
smart devices and computers.
Sling Psychrometer
BELL
SIREN OR
OTHER
DEVICE
FUSE
(1.5 AMP)
Create a system
precisely suited to deliver the
information you need.
Call Hummert International for system set-up and pricing
Model 1330J
• One of the
most accurate
methods to determine atmospheric humidity by the
reading of two thermometers
• Measures the wet and dry bulb temperatures of the
surrounding air and permits conversion of the readings
to a relative humidity percentage on the “slide rule” scale
built into the case
• Mercury filled; 6 wicks
are included
20ºF to 120ºF and 10
to 100% RH range
Price per Each
Catalog # 1-11 12 & up
48-02200 $ 75.50 $ 66.44
Electrical Requirements
Thermalarms are built to operate a low-voltage, low-current alarm system (typically 6
to 24 volts DC @ 0.5 amp or less). A simple relay circuit should be used in systems
exceeding 0.5 amp of current.
Connect as many Thermalarms as you need!
+ -
BATTERY
OR
POWER SUPPLY
RELAY
THERM ALARM THERM ALARM THERM ALARM
Multiple Thermalarms, wired in parallel with a relay
606 800-325-3055
www.hummert.com