2018-2019 Horticultural Catalog

Turbo XE Fogging Fans
• Aquafog units produce small particles averaging 25 microns in
size and feature flow control for adjusting the amount of liquid
being fed to the fogging fan. At rates near full capacity, 95% of the
particles produced are small enough to stay airborne
• Uses ordinary water and power supply to produce high
quality, high volume fog without clogging
• Fans can be stationary or equipped with oscillation
Included with every fan:
• Adjustable-angle hanging bracket
• Choice of visual flowmeter panel with strainer
• 12’ SJO indoor/outdoor, heavy-duty power cord
• 20’ Poly-Flo water line tubing
• 16’ water drainage line
• 100% stainless steel hardware
• Easy-to-follow operator’s manual
Model XE-500 XE-1000 XE-2000
Propulsion Distance 25’ 30’ 35’
Average Coverage 25’-45’ 30’-60’ 34’-70’
Max. Dry Fog Output 12 GPH 20 GPH 30 GPH
Motor 1/4 HP* 1/2 HP 1 HP
Energy Consumption 7.4 Amps 7.4 Amps 10.6 Amps
@ 120V @ 120V @ 120V
CFM Rating 2,160 2,730 3,260
Noise @ 10’ 68-72 dB(A) 74-77 dB(A) 76-79 dB(A)
Weight 40 lbs 39 lbs 50 lbs
Catalog Number 33-38800 33-38810 33-38820
Each $ 1,220.00 $ 1,240.00 $ 1,350.00
*XE-500 comes with a 1/2 HP motor and a 1.4 HP fan blade assembly
Turbo XE Oscillator
XE-360
• Maximum coverage
of up to 70’
diameter
• Uniform fog
dispersion
• Rapid arc setting
• Manual override
• Dwell-free design
• 4 up to 360 rotations
in 2 minutes
• 115 volt to
60/50Hz 1 Phase
Humidistat Controls
H2-120
If your humidity requirement is 85% or under
the Humidistat Control offers the best overall
control. When the humidity level drops to
about 7% below the set point, the humidistat
will activate to replenish the loss of humidity.
Capable of operating up to 2 - 1HP units. 115V
60/50Hz
Thermostat Control
TH1-120
This thermostat will provide accurate
measurement of the temperature, automatically
controlling your Aquafog unit at approximately
3ºF above and below your desired set point.
Control units are assembled with high quality
waterproof components. Capable of operating
a single Aquafog unit up to 1 HP. 115V 60/50Hz
Flowmeter
with strainer
Catalog
Model Description Number Each
XE-360 Oscillator 33-38860 $ 390.00
H2-120 Humidistat control 33-38870 360.00
TH1-120 Thermostat control 33-38850 230.00
SV-115V 1/4” Asco solenoid valve 33-38880 95.00
• Excellent for safe, effective chemical fogging. used for liquid pesticide
and fungicide application, insecticide use and foliar feeding
• Capable of continuous duty operation
• All fans are standard-equipped with a dark teal housing and a dual
voltage, white epoxy painted Baldor Wash Down Duty Motors
(WDD) motor 115/230V, 1 phase, 60Hz, designed to give the best
protection in moist, humid environments
Call
Hummert’s
today for
your design
layout
and quote!
See page
534 for
more info
Odor Neutralizing System
Model XE 1000 with Oscillator
Humidifying and Cooling
Poinsettia Crop
Due to the pungent odor associated with the flowering of the
cannabis plant, in order to maintain their license, many grow
facilities have a mandated requirement to provide an effective
method of odor control. In most states, the odor must be
prevented from escaping outside the facility.
How it Works?
• High pressure fog is achieved through an atomizing process
via a high pressure fog pump and specialty fogging nozzles
producing billions of micron sized droplets
• Nozzle ring is installed on the exterior of any vent or duct
allowing the fog to mix with exhausting air
• Specially formulated neutralizing solution (Odor Armor®) is
injected into the fog, completely mixing with airborne odors. A
series of chemical and physical reactions modify the structure
of the odor, not merely masking but eliminating the odor
fogging fans
SHIPPED FOB: Pennsylvania
800-325-3055
www.hummert.com
549