23.01.2018 Views

2018-2019 Horticultural Catalog

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Greenhouse Construction & Extrusions<br />

Figure 2<br />

POLY FASTENING SYSTEM<br />

Wiggle Wire is capable<br />

of holding two layers of<br />

polyethylene, plus a piece of<br />

shade cloth. You simply lock<br />

the polyethylene with one<br />

wire, then go back and install<br />

a second wire to hold the<br />

shade cloth in place.<br />

Wiggle Wire is capable of<br />

securing greenhouse poly,<br />

shade cloth, screening, and<br />

a multitude of other flexible<br />

materials.<br />

Install Base<br />

Attach base to wood or metal surface.<br />

Install screws no more than 12” apart.<br />

Install Cover and Wire<br />

Stretch single or double poly across base and<br />

snap wire into place. You can use more than<br />

one material with one wire. Order extra wires<br />

to lock corners, etc. Materials can range<br />

from 2 mil to 10 mil thick.<br />

To meet your specific greenhouse needs, Conley’s<br />

offers two aluminum locking options for polyethylene<br />

installation. Aluminum base with spring lock and vinnipet<br />

base with springs are used to secure poly sides and<br />

roof. The tubelock splicer bow and vinnipet splicer bow<br />

secures poly film roof to poly film end walls. The gable<br />

end bar combo unit, tubelock splicer bow and vinnipet<br />

splicer bow create a flashing for end walls and roof<br />

coverings.<br />

Polyethylene Covering Options<br />

Tubelock<br />

A<br />

B<br />

Conley’s Standard Locking Accessories (Aluminum)<br />

A & B<br />

Figure 1<br />

Overlap Wiggle<br />

Wire Ends<br />

Overlap wiggle wire<br />

one section during<br />

installation. Be sure<br />

that the pattern is<br />

reversed for the top<br />

section. See Figure 2<br />

Lock Corners<br />

IMPORTANT: Install<br />

12” wire sections<br />

wherever poly fastener<br />

turns a corner. Be sure<br />

to reverse the wire<br />

pattern. See Figure 3<br />

Wiggle Wire can<br />

also be installed on<br />

arched structures. Start<br />

at the bottom and follow<br />

the bend. Attach the<br />

screws every 12”.<br />

See Figure 4<br />

Unit <strong>Catalog</strong> Price per Each<br />

Description Length Number 1-9 10 & up<br />

(A) Tubelock base 12’ 21-05060 $ 14.75 $ 13.57<br />

(B) Tubelock clip 6’ 21-05080 6.09 5.48<br />

(D) Tubelock Splicer 24’ 21-05140 131.00 120.52<br />

(E) Aluminum vinnipet base 12’ 21-05090 6.49 5.97<br />

(F) Aluminum lock spring PVC coated 6’6” 21-05120 0.91 0.79<br />

(H) Vinnipet Splicer bow w/ spring 24’ 21-05160 98.00 90.16<br />

(I) Gable End Combo Bar 23’6” 21-05040 106.00 97.52<br />

I<br />

C<br />

A<br />

B<br />

RIGHT<br />

WRONG<br />

Figure 3<br />

Figure 4<br />

D<br />

12” WIGGLE<br />

WIRE<br />

<strong>Catalog</strong> Price per Each<br />

Description Number 1-99 100 & Up<br />

* 8’-11” Aluminum Base 45-81030 $8.19 $7.99<br />

6’ Stainless Steel Wire 45-81050 2.09 1.99<br />

* Truck ship only<br />

Greenhouse Extrusions<br />

H<br />

greenhouse construction & extrusions<br />

Vinnipet Springs<br />

D<br />

E<br />

G<br />

F<br />

H<br />

I<br />

800-325-3055<br />

www.hummert.com<br />

487

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!