2018-2019 Horticultural Catalog

Landscape Techline ® HCVXR Dripline
The industry’s best protection against root intrusion
landscape techline ® HCVXR dripline • punches
The only 17mm landscape drip irrigation line that
infuses Cupron copper oxide (Cu2O) directly into the
mold of each emitter to protect against root intrusion.
Root resistant properties never leach out past
the emitter, providing long lasting root barrier for
subsurface drip irrigation
Integrated high check valve holds back 8.5’ of water
when installed on slopes to preserve application
uniformity and keeps system fully charged
Physical root barrier, anti-siphon feature provide
additional root and debris protection
Installation time is reduced by eliminating extra
zones needed to account for sloping landscape
Pressure compensating
UV resistant & laser etched for easy ID
15 year limited warranty against root intrusion
3/4” MIPT
Male Adapter
Line End Plug
with Ring
Providing a long lasting solution with
superior protection for:
Subsurface or on-surface installations
Turf, shrubs, trees and flowers
Sports turf
Slopes
Curved, angular, or narrow
planting areas
High traffic areas
Green walls, green roofs
Raised planters
Dripper Flow Coil Catalog Price per Each
Spacing Rate GPM/100’ Length Number 1-4 5 & up
12” .33 gph .55 100’ 19-77200 $ 49.60 $ 47.12
18” .33 gph .37 100’ 19-77220 44.20 41.99
12” .33 gph .55 500’ 19-77240 250.00 237.50
18” .33 gph .37 500’ 19-77260 220.00 209.00
Figure 8 Line End
Tee
Elbow
Manual Flush Valve
Coupling
HERE’S HOW IT WORKS
Cupron® copper oxide (Cu2O)
technology effectively deters
roots from growing in the HCVXR
emitter. During the manufacturing
process, the copper oxide is mixed
with the emitter resin material
embedding the copper oxide in the
emitter. It will not wash off, wear
off or leach out of the emitter. The
copper colored top portion of the
emitter contains the embedded
copper oxide.
Top with embedded copper oxide
Diaphragm
Bottom with large filtration area
17 mm Installation Components
Qty/ Catalog Price per Case
Description Pkt Number 1-9 10 & up
3/4” MIPT male adapter 100 19-66220 $ 80.00 $ 72.50
Line End Plug 100 19-66280 0.59 0.47
Manual Flush Valve 10 19-68000 34.80 33.06
Figure 8 Line End 25 19-68020 4.09 3.89
Insert Elbow 25 19-68040 11.25 10.69
Insert Coupling 25 19-68060 8.59 8.16
Insert Tee 25 19-68080 12.15 11.54
3/4” MPT Adapter 25 19-68100 13.05 12.40
1/2” MPT Adapter 25 19-68120 12.40 11.78
3/4” MPT Adapter
1/2” MPT Adapter
Punches
Quick Punch
Quick-Punch 1/2” and 3/4” main
Adjustable for tube size
Leakproof joints
Durable plastic construction
3.0 mm (Blue tip - .100” hole)
Catalog Price per Each
Number 1-11 12 & Up
18-00240 $ 19.10 $ 17.50
3MM Plastic Punch
For punching holes in polyethylene
pipe to install fittings for sprinklers
or drippers. (.125”, 3mm)
Each
19-76620 1-9 $ 23.30
10 & up 21.20
Hole Punch
Used for making 1/8” holes for
barb fittings
When used with poly pipe fittings
or mist nozzles can be inserted
immediately after the hole is made
and the pipe will close tightly around
the object
The hardened 420 stainless
tip remains sharp and reliable
after thousands of punches.
Each
HP125 18-40970 $ 7.09
362 800-325-3055
www.hummert.com