2018-2019 Horticultural Catalog

Polyethylene Film Accessories
polyethylene film accessories
Adjustable Blower - Model B60
This blower is used to inflate two
layers of polyethylene greenhouse
covering. Can provide heat savings
of up to 40% This blower has
automatic-reset thermal protection
which shuts off the motor should
excessive temperatures develop.
Adjustable air inlet damper included.
115-Volt — Amps 60 CFM
Price per Each
Catalog # 1 - 5 6 & up
26-70000 $ 88.50 $ 82.04
Adjustable Blower
Mounting Kit
Designed to be used with the
above adjustable blower. Made of
heavyweight alum inum, complete
with bolts, nuts, washers and
complete installation instructions.
Catalog #
Each
26-70030 $ 33.50
Self Adjusting Outside Air
Inflation System
Allows the plastic to inflate at the point
of penetration: by the air inlet hose.
The intake hose/tube assembly will
adjust automatically to allow the plastic
to inflate to a 10” air space.
System benefits:
• Condensation between the layers
of plastic is reduced bringing in the
humid air from the outside
• Exhaust fans no longer compete for
the blower and draw the inflation out of the plastic
• Inside condensation is reduced because, with the plastic consistently
inflated, the colder layer is kept away from the warmer inside layer
• Inflation system includes: 115 volt .60CFM blower, blower bracket kit,
18” intake hose, intake tube assembly, and air regulator
Drop Ship Charge $10
Catalog # Each
Outside Air Inflation System 26-70060 $ 240.00
Retrofit Outside Air Kit 26-70020 91.50
Flexible Jumper
For use in connecting double
layer polyethylene from roof to
side wall to allow pressurized
air in both locations. 24” long.
26-70050 $ 24.40
This is a non-woven, polyester tape
that protects and extends the life of
your greenhouse covering. Apply to
greenhouse frame any place where
poly film contacts, and breakdown
at the frame is virtually eliminated.
Roll is 40’ long and 1 1 ⁄2” wide.
Price per Each
Catalog # 1 - 11 12 & up
26-61680 $ 18.20 $ 16.56
Pak Gard Insulator Tape
Dura Tape - Poly Patch
A linered greenhouse
patch tape combining
a clear UV-resistant
film with an aggressive
acrylic adhesive
designed to adhere to
most commercial
greenhouse film.
Will not break down
after extended outdoor
exposure.
Poly Inflation Controller
• Regulates airflow for
twin-film greenhouse
blowers to maintain
pressure between
the film layers
• Helps prevent
damage by over
or under inflation
• Offers more
stability in
windy environments
• Features a built in digital manometer
• Offers local humidity and temperature data on the display
Woven Web Tape
(Hold Down Tape)
Resistant to water and
temperature extremes.
Lasts up to 2 years!
Price per Each
Size Catalog # 1-53 54 & up
2” x 48’ 26-61230 $ 11.00 $ 9.79
1-26 27 & up
4” x 48’ 26-61240 22.05 19.62
1-17 18 & up
6” x 48’ 26-61260 33.10 29.46
1-11 12 & up
10” x 48’ 26-61290 55.00 48.95
Saves energy by maintaining
pressure between films
• Has a remote temperature sensor located in the inlet air intake
• This unit can be set to run in manual mode to hold a specified
pressure setting or auto mode to adjust pressure based on
temperature and wind gusts
Catalog # Each
Poly Inflation Controller 26-70120 $ 480.00
Durable, U.V. stabilized, black woven
polypropylene fabric tape used to hold
down poly film on greenhouses, cutting
down on the noise factor and protecting
the film against tearing. Also used to
reinforce edges and seams of fabric.
Price per Each
Size Case Catalog # 1-23 24 & up
1-3/4” x 300’ 24 27-80190 $ 20.45 $ 19.43
2-3/4” x 300’ 16 27-80170 26.90 24.21
White Vinyl Batten Tape
Used for stapling poly film to a wood frame. Just
position film over frame tape over film, and then
staple every 4”.
Price per Each
Size Catalog # 1-3 4 & up
3/4” x 500’ 26-60050 $ 47.80 $ 44.36
488 800-325-3055
www.hummert.com