2018-2019 Horticultural Catalog

Remote Control
Watering Controller - 6 or 12 Zone
The remote controls
allow for the user
to turn on/off zones
away from the
controller and adjustments
can be made
based on visual
watering or misting
cycles and is ideal for
adjusting sprinkler
heads, repairs or for
extra watering (up to
300 ft)
Orbit watering controllers
S The Orbit 6 or 12 zone remote control watering controllers come in
a weatherproof cabinet with internal transformer for easy indoor or
outdoor plug-and-go installation
S Easy-Set Programming Logic and Indoor/Outdoor Mounting
S Large LCD and Dial makes it easy to read and program
S Water budgeting provides for an adjustment range from 105% to
200% in increments of 10%
S Rain delay feature provides for 24 hour delay or can be adjusted to
increase or decrease the initial setting
S There are 3 options provided for how often watering is desired:
days of the week, intervals every “X” days or interval watering can
be programed either every odd or even day
S One Lithium CR2032 battery is included and required to retain
S Reliable, advanced, easy to use
and very economical
S Easy to program using easy-set
logic, with large buttons and
large, easy to read LCD display
S Three independent programs
as to how often; days of week
(Mon., Tue., Wed., etc.), watering
intervals every "x" number of
days, or odd or even days
S The SUPER DIAL can be
programmed to water/mist
multiple times per day from
1 to 99 minutes
S The lockable cabinet can be
installed indoors or outdoors
S Should it be predicted to or it’s
raining, a convenient rain delay
button postpones the program
for 24, 48 or 72 hours, can be
connected to a rain sensor
S The SUPER DIAL is equipped
with a cord and plug with a builtin
transformer to provide 24 volt
power to solenoids
S Complete and concise
installation and operation
directions are included
Programming with Easy-Set Logic – Easy to understand and use
S The SUPER DIAL controller S Using programs to group stations
has the capability of having 3
with similar watering needs will
independent programs; A, B or C. maximize irrigation needs and
Each are independent of the other conserve on water as well
S A program is where all of the S An excellent feature which is
sprinkler settings are stored
usually unique only on highend,
costly controllers is “water
S Each independent program (be it
A, B or C) consists of a group
budgeting”. This is also available
of individual stations (or zones) on the SUPER DIAL controller.
are set to a specific start time
This feature allows adjustment
and run time
range from 10% to 200% by
increments of 10%. The default
S Many applications only
value is 100%. Another great
require only one program
water saver especially after
(such as A) however,
it just rained or hasn't rained for
multiple programs allow
some time; all settings can remain
special zones to be set
the same
up for drip irrigation,
newly seeded lawns or
S All zones can be turned off should
freshly planted areas
it begin to rain by using the
optional Rain Sensor
the time and programs in memory during power loss. Annual
replacement is recommended
S Three programs are available: A, B and C; each to have their own
set of programs for each zone
S Manual watering is easy by selecting either A, B or C and will then
run the program as previously programmed
S Rain sensor bypass terminals are provided; see the optional
Wireless Rain and Freeze Sensor
S Input: 120vac; output 24vac
Price per Each
Description Catalog # 1-2 3 & up
6 Zone Controller 20-00900 $ 110.00 $ 99.71
12 Zone Controller 20-01000 132.00 120.59
Super Dial Indoor or Outdoor Controller
Price per Each
Description Catalog # 1-2 3 & up
4 Zone Controller 20-01190 $ 75.50 $ 69.77
6 Zone Controller 20-01200 73.00 66.67
9 Zone Controller 20-01210 83.50 78.33
12 Zone Controller 20-01220 121.00 112.40
392 800-325-3055
www.hummert.com